1/2" Drive Ratchet. 1/2" Drive Stud Remover. Manufactured by: Williams, a JH Williams Company..
This item usually ships within a few days but may take up to 4 weeks in rare occasions. |
Rennsteig Screw Extractor Set: Includes 5 sizes, #1 - #5 in plastic pouch. Unscrews ruined screws and bolts without damaging threads. Unique design allows both left and right handed turning. Made of hardened chrome vanadium steel. Made in Germany.
|
5-PC. BOLT EXTRACTOR SET Reverse spiral flutes provide max. gripping power High carbon steel ensures longer life Universal lobular design fits all fasteners 3/8" square drive for use with hand ratchets - impact wrenches and air ratchets Hexagonal flats for use with flat wrench - pliers, adjustable wrench, sockets or - VISE-GRIP locking pliers 394001 5PC BOLT GRIP SET Includes: 3/8", 7/16", 1/2", 9/16", 5/8"
|
Stud & Pipe Nipple Remover & Installers. Collet 7/16"-20. Manufactured by: Williams, a JH Williams Company..
This item usually ships within a few days but may take up to 4 weeks in rare occasions. |
Extractor is packaged with the correct drill bit size. Aggressive left-hand spiral design provides extra ripping power. High speed steel drill bit ensures fast, clean drilling. Extractor size and recommended drill bit size are etched on each extractor.
Type=EX-1Use Drill Size Ins.=5/64
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading wher
e high accuracy and tolerance thread is not critical.
METRIC THREAD SIZE
Size In=12mm-1.75Flutes=4
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Pullers, Sets. Stud Remover/Installer Set. Manufactured by: Williams, a JH Williams Company..
This item usually ships within a few days but may take up to 4 weeks in rare occasions. |
Stud & Pipe Nipple Remover & Installers. Collet 5/16"-18. Manufactured by: Williams, a JH Williams Company..
This item usually ships within a few days but may take up to 4 weeks in rare occasions. |
Miscellaneous Trades Tools. Set-Up Wedge, 6". Manufactured by: Williams, a JH Williams Company..
This item usually ships within a few days but may take up to 4 weeks in rare occasions. |
Non-Insulated Terminal Die Only - Our world-famous Wire Crimper Tools save you time and energy.Non-Insulated Terminal Die Only features include:
Below is more info on our Non-Insulated Terminal Die Only Description: Non-insulated Terminal die onlyBox Qty: 1 Case Qty: - This item does not ship to APO/FPO addresses. |
Set contains fractional plug tap and 1" hexagon dies in sizes: 1/4" - 20 NC, 1/4" - 28 NF, 5/16" - 18 NC, 5/16" - 24 NF, 3/8" - 16 NC, 3/8" - 24 NF, 7/16" - 14 NC, 7/16" - 20 NF, 1/2" - 13 NC, 1/2" - 20 NF. Pipe thread plug tap and 1" hexagon dies in size
s: 1/8" - 27 NPT. Threading tools: plain die stock, 1" dies, offset adjustable tap wrench No. 0 to 1/2" and plastic case.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
HANSON PLUG TAP High carbon steel fractional plug taps 3 to 5 threads chamfered For routine maintenance-repair work-rethreading Designed for hand threading work 4 straight flutes ground to provide- rapid chip removal Taps produce a class 2B thread 8120 1/4-20 HANSON PLUG TAP SIZE:1/4"-20NC PACK TYPE:CardedCarded
|
Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading wher
e high accuracy and tolerance thread is not critical.
METRIC THREAD SIZE
Size In=12mm-1.50Flutes=4
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Quickly and permanently restores stripped, worn or damaged threads to their original size and condition. The hard, stainless steel (18-8) diamond shaped wire inserts work in just about any part or material; aluminum, magnesium, cast iron, bronze, etc. The
insert has a driving "tang" for installation which is notched for easy removal. Kit contains a Heli-Coil tap, installation tool, a quantity of inserts and detailed instructions, packaged in durable placon or vinyl pouches.
INCH COARSE - CARD/12
Size x Lgth=1/4-20 x .375"Drill Size In=17/64
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
SCREW EXTRACTOR SET
5 pc. asst in pouch
Made from chrome vanadium steel
Lifetime warranty
SE5C SCREW EXTRACTOR
|
HANSON PIPE TAPS
High carbon steel taper pipe taps
Cut internal threads in pipes
Nominal tap size is fitting being tapped
Ideal for pipe fittings
Tapered at a rate of 3/4" per foot
8203 1/4-18 HANSON PIPE TAP
SIZE:1/4"-18NPT
FLUTES:4Carded
|
Boa Grabit Screw & Bolt Extractors: Easily removes damaged screws and bolts using standard power drills and quick change chucks as well as common wrenches and deep sockets. Removes screws (no. 6-10, 12-14) and bolts (1/8" - 5/16") and other fasteners. Made from hardened steel. Two piece set. Made in the U.K.
|
For removing broken screws and bolts. Left hand spiral, tapered flute. Correct drill size stamped on each screw extractor. Eliminates redrilling and retapping for a larger screw. One each: EX1, EX2, EX3, EX4, EX5, in plastic pouch.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
PIPE TAPS Right hand threads Chrome finish Drill size marked on tap 20354 1/2-14NPT BULK PIPE TAP SIZE:1/2-14NPT DESC:Bulk
|
Set contains metric plug tap and 1" hexagon dies in sizes: 3mm - 0.50, 4mm - 0.70, 5mm - 0.80, 6mm - 1.00, 7mm - 1.00, 8mm - 1.25, 9mm 1.25, 10mm - 1.50, 12mm - 1.50, 12mm - 1.75. Pipe thread plug tap and 1" hexagon dies in sizes: 1/8" - 28 BSP. Threadin
g tools: plain die stock, 1" dies, offset adjustable tap wrench, taps No. 0 to 1/2" and plastic case.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
One each tap/5/8" die 6-32 NC, 8-32 NC, 10-24 NC, 10-32 NF 1/4-20 NC, 12457 plain die stock, 5/8" hex, No. 12401 T-Handle tap wrench.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Designed to remove broken studs, bolts, socket screws and fittings. Aggressive left hand spiral design for extra gripping power. Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance incre
ases, the extractor's grip increases. Extractor size and recommended drill bit size are etched on each tool. High speed steel drill bit ensures fast, clean drilling. Set includes: Spiral Flute Screw Extractors in sizes: EX-1, EX-2, EX-3 and HSS Drill Bits
in sizes: 5/64", 7/64", 5/32", and Vinyl Pouch
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
PIPE TAPS For pipe fittings. Cuts internal threads in pipes and other places where extremely tight fit is required. Long-lasting taps cut cleanly and accurately and resists rust and tarnish. Available in bulk and on attractive display cards with proper drill size permanently marked on each tap. TAP SIZE 3/4"-14 NPT USE DRILL SIZE 59/64 Package Shipping Size 2.00 x 2.00 x 4.00 (not product dimensions)
|
Stud & Pipe Nipple Remover & Installers. Collet 3/8"-24. Manufactured by: Williams, a JH Williams Company..
This item usually ships within a few days but may take up to 4 weeks in rare occasions. |
Stud & Pipe Nipple Remover & Installers. Collet 1/4"-20. Manufactured by: Williams, a JH Williams Company..
This item usually ships within a few days but may take up to 4 weeks in rare occasions. |
Stud & Pipe Nipple Remover & Installers. Collet 1/2"-20. Manufactured by: Williams, a JH Williams Company..
This item usually ships within a few days but may take up to 4 weeks in rare occasions. |
Installs and removes tub drains and closet spuds. Fits most tub drains and 1-1/2" to 2" closet spuds.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading wher
e high accuracy and tolerance thread is not critical.
METRIC THREAD SIZE
Size In=18mm-1.50Flutes=4
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
High carbon steel self aligning taps, ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is needed. Used for hand threading work in a variety of materials; produces class 2B thread. Tap size and recomme
nded drill bit size is laser etched on each tool for easy identification.
Size In=5/16-24NF
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Extractor is packaged with the correct drill bit size. Aggressive left-hand spiral design provides extra ripping power. High speed steel drill bit ensures fast, clean drilling. Extractor size and recommended drill bit size are etched on each extractor.
Type=EX-3Use Drill Size Ins.=5/32
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
HANSON SPIRAL SCREW EXTRACTOR Aggressive left-hand spiral design Removes broken studs, bolts, screws & fittings Constructed of high carbon steel Sizes etched on each extractor 53401 EX-1 SCREW EXTRACTOR DRILL SIZE:5/64" DESC:EX-1Carded
|
Extractor is packaged with the correct drill bit size. Aggressive left-hand spiral design provides extra ripping power. High speed steel drill bit ensures fast, clean drilling. Extractor size and recommended drill bit size are etched on each extractor.
Type=EX-2Use Drill Size Ins.=7/64
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
|
|
|
Copyright © 1999-2019 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |