Items 1- 32 of 117 total

Flat Free Hand Truck Tire with Sawtooth Tread, 4.10/3.50-4" Flat Free Hand Truck Tire with Sawtooth Tread, 4.10/3.50-4"
Online
$27.20 for Each
Retail $29.92
Mfr PN: 10
Stock: 48

Marathon Industries 4.10/3.50-4" Flat Free Hand Truck Tire

  • Sawtooth Tread
  • 2.25" Offset Hub
  • 5/8" Standard Ball Bearing
  • Mounted on a Steel Rim

Made of solid polyurethane, this tire has the same bounce, feel, and cushioning as a regular air-filled tire with the benefit of never going flat! Non-marking, this tire is perfect for hand trucks, air compressors, power washers, generators, and other small equipment. Polyurethane will also not be affected by ozone or UV Rays

300 lb. Load Capacity

Not for Highway Use

Please follow these three steps to measure your tire accurately.

  1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
  2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
  3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.
Online
$27.20 for Each
Retail $29.92
Mfr PN: 10
Stock: 48

Flat Free Wheelbarrow Tire with Ribbed Tread, 3.50/2.50-8" Flat Free Wheelbarrow Tire with Ribbed Tread, 3.50/2.50-8"
Online
$31.80 for Each
Retail $34.98
Mfr PN: 3
Stock: 48

Marathon Industries 3.50/2.50-8" Flat Free Residential Wheelbarrow Tire

  • Ribbed Tread
  • 6" Centered Hub
  • 5/8" Standard Ball Bearing
  • Mounted on a Steel Rim

Made of solid polyurethane, this tire has the same bounce, feel, and cushioning as a regular air filled tire with the benefit of never going flat! Polyurethane will also not be affected by ozone or UV Rays

300 lb. load capacity.

Not for Highway Use

Please follow these three steps to measure your tire accurately.

  1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
  2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
  3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.
Online
$31.80 for Each
Retail $34.98
Mfr PN: 3
Stock: 48

Pneumatic Tire and Tube, 4.10/3.50-4" Pneumatic Tire and Tube, 4.10/3.50-4"
Online
$11.06 for Each
Retail $12.17
Mfr PN: 20501
Stock: 0

Marathon Industries 4.10/3.50-4" Pneumatic Tire and Tube for 4" Rims

  • 4 Ply Rubber
  • Replacment Tire and Tube for Hand Trucks, Power Washers, Generators, and other Small Equipment
  • Max 30 psi - Inflate with Manual Pump Only
  • Not for highway Use

Please follow these three steps to measure your tire accurately.
  1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
  2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
  3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.
Online
$11.06 for Each
Retail $12.17
Mfr PN: 20501
Stock: 0

Pneumatic Tire and Tube, 2.80/2.50-4" Pneumatic Tire and Tube, 2.80/2.50-4"
Online
$11.06 for Each
Retail $12.17
Mfr PN: 20601
Stock: 48

Marathon Industries 2.80/2.50-4" Pneumatic Tire and Tube for 4" Rims

  • 4 Ply Rubber
  • Max 30 psi - Inflate with Manual Pump Only
  • Not for highway Use

Please follow these three steps to measure your tire accurately.
  1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
  2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
  3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.
Online
$11.06 for Each
Retail $12.17
Mfr PN: 20601
Stock: 48

Flat Free Cart Tire for Lawn, Garden, Marina, 20x2.0" Flat Free Cart Tire for Lawn, Garden, Marina, 20x2.0"
Online
$36.26 for Each
Retail $39.89
Mfr PN: 92001
Stock: 48

Marathon Industries 20x2.0" Flat Free Lawn, Garden, Marina Cart Tire

  • Ribbed Tread
  • 2.4375" Centered Hub
  • 3/4" Standard Ball Bearings
  • Mounted on a Black Nylon Rim
18.5" Actual Overall Diameter
This polyurethane tire is perfect for Vermont carts, marina carts, beach carts, and lawn and garden carts. It is easy to install and will allow you to use your cart without ever having flats.

Please follow these three steps to measure your tire accurately.
  1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
  2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
  3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.
Online
$36.26 for Each
Retail $39.89
Mfr PN: 92001
Stock: 48

Replacement Tube, 2.80/2.50-4" Replacement Tube, 2.80/2.50-4"
Online
$3.86 for Each
Retail $4.25
Mfr PN: 20991
Stock: 48

Marathon Industries 2.80/2.50-4" Replacement Tube for 4" Rims

  • Max 30 psi - Inflate with Manual Pump Only
  • Not for highway Use

Online
$3.86 for Each
Retail $4.25
Mfr PN: 20991
Stock: 48

Flat Free Wheelbarrow Tire with Ribbed Tread, 4.80/4.00-8" Flat Free Wheelbarrow Tire with Ribbed Tread, 4.80/4.00-8"
Online
$45.33 for Each
Retail $49.86
Mfr PN: 1
Stock: 48

Marathon Industries 4.80/4.00-8" Flat Free Contractor Wheelbarrow Tire

  • Ribbed Tread
  • 6" Centered Hub
  • 5/8" Standard Ball Bearing
  • Mounted on a Steel Rim
Made of solid polyurethane, this tire has the same bounce, feel, and cushioning as a regular air filled tire with the benefit of never going flat! Polyurethane will also not be affected by ozone or UV Rays

500 lb. load capacity.

Not for Highway Use

Please follow these three steps to measure your tire accurately.
  1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
  2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
  3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.
Online
$45.33 for Each
Retail $49.86
Mfr PN: 1
Stock: 48

Air Filled Wheelbarrow Tire with Ribbed Tread, 4.80/4.00-8" Air Filled Wheelbarrow Tire with Ribbed Tread, 4.80/4.00-8"
Online
$18.00 for Each
Retail $19.80
Mfr PN: 20065
Stock: 0

Marathon Industries 4.80/4.00-8" Air Filled Contractor Wheelbarrow Tire

  • Ribbed Tread
  • 3" Centered Hub
  • 5/8" Standard Ball Bearing
  • Mounted on a Single Piece Steel Rim
  • 4-Ply Rubber Tire with Tube
  • 400 lb. Weight Capacity
  • Max 30 psi - Inflate with Manual Pump Only
  • Not For Highway Use

Please follow these three steps to measure your tire accurately.
  1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
  2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
  3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.
Online
$18.00 for Each
Retail $19.80
Mfr PN: 20065
Stock: 0

Wheelbarrow Wheel Wheelbarrow Wheel
Online
$27.79 for 1 EA
Retail $38.99
Mfr PN: 335255
Stock: 3
WHEELBARROW WHEEL Wheelbarrow wheel assembly 2-ply, rib tread 5/8" bore 6" centered hub Tubeless Model No. 400-6 335255 400-6 WHEELBARROW WHEEL SIZE:6"
Online
$27.79 for 1 EA
Retail $38.99
Mfr PN: 335255
Stock: 3

8 Inches Flatfree Tire Assembly 8 Inches Flatfree Tire Assembly
Online
$56.65 for 1 EA
Retail $78.99
Mfr PN: FFTCC
Stock: 14
FLAT-FREE SOLID TIRE Lightweight solid polyurethane 8" maintenance free tire assembly FFTCC 8 IN. FLATFREE TIRE ASSEMBLY
Online
$56.65 for 1 EA
Retail $78.99
Mfr PN: FFTCC
Stock: 14

Air Filled Wheelbarrow Tire with Knobby Tread, 4.80/4.00-8" Air Filled Wheelbarrow Tire with Knobby Tread, 4.80/4.00-8"
Online
$18.00 for Each
Retail $19.80
Mfr PN: 20047
Stock: 48

Marathon Industries 4.80/4.00-8" Air Filled Contractor Wheelbarrow Tire

  • Knobby Tread
  • 6" Centered Hub
  • 5/8" Standard Ball Bearings
  • Mounted on a Single Piece Steel Rim
  • 4-Ply Rubber Tire with Tube
  • 400 lb. Weight Capacity
  • Max 30 psi - Inflate with Manual Pump Only
  • Not for Highway Use

Please follow these three steps to measure your tire accurately.
  1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
  2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
  3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.
Online
$18.00 for Each
Retail $19.80
Mfr PN: 20047
Stock: 48

Air Filled Wheelbarrow Tire with Ribbed Tread, 4.80/4.00-8" Air Filled Wheelbarrow Tire with Ribbed Tread, 4.80/4.00-8"
Online
$18.00 for Each
Retail $19.80
Mfr PN: 20063
Stock: 48

Marathon Industries 4.80/4.00-8" Air Filled Contractor Wheelbarrow Tire

  • Ribbed Tread
  • 3" Centered Hub
  • 3/4" Standard Ball Bearing
  • Mounted on a Single Piece Steel Rim
  • 4-Ply Rubber Tire with Tube
  • 400 lb. Weight Capacity
  • Max 30 psi - Inflate with Manual Pump Only
  • Not For Highway Use

Please follow these three steps to measure your tire accurately.
  1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
  2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
  3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.
Online
$18.00 for Each
Retail $19.80
Mfr PN: 20063
Stock: 48

Replacement Tube, 4.10/3.50-4" Replacement Tube, 4.10/3.50-4"
Online
$3.86 for Each
Retail $4.25
Mfr PN: 20990
Stock: 48

Marathon Industries 4.10/3.50-4" Hand Truck Tire Replacement Tube for 4" Rims

  • Max 30 psi - Inflate with Manual Pump Only
  • Not for highway Use

Online
$3.86 for Each
Retail $4.25
Mfr PN: 20990
Stock: 48

Air Filled Wheelbarrow Tire with Ribbed Tread, 4.80/4.00-8" Air Filled Wheelbarrow Tire with Ribbed Tread, 4.80/4.00-8"
Online
$18.00 for Each
Retail $19.80
Mfr PN: 20001
Stock: 0

Marathon Industries 4.80/4.00-8" Air Filled Contractor Wheelbarrow Tire

  • Ribbed Tread
  • 6" Centered Hub
  • 5/8" Standard Ball Bearing
  • Mounted on a Single Piece Steel Rim
  • 4-Ply Rubber Tire with Tube
  • 400 lb. Weight Capacity
  • Max 30 psi - Inflate with Manual Pump Only
  • Not For Highway Use

Please follow these three steps to measure your tire accurately.
  1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
  2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
  3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.
Online
$18.00 for Each
Retail $19.80
Mfr PN: 20001
Stock: 0

Pneumatic Tire and Tube, 4.80/4.00-8" Pneumatic Tire and Tube, 4.80/4.00-8"
Online
$13.66 for Each
Retail $15.03
Mfr PN: 20002
Stock: 0

Marathon Industries 4.80/4.00-8" Pneumatic Tire and Tube for 8" Rims

  • 4 Ply Rubber
  • Replacement Tire and Tube for Contractor Wheelbarrows
  • Max 30 psi - Inflate with Manual Pump Only
  • Not for highway Use

Please follow these three steps to measure your tire accurately.
  1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
  2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
  3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.
Online
$13.66 for Each
Retail $15.03
Mfr PN: 20002
Stock: 0

Wheelbarrow Wheel Wheelbarrow Wheel
Online
$27.79 for 1 EA
Retail $38.99
Mfr PN: 335260
Stock: 6
WHEELBARROW WHEEL 2-ply tubeless Ball bearing Hub 6" centered 335260 480-400-8 WLBRROW WHEEL SIZE:8"
Online
$27.79 for 1 EA
Retail $38.99
Mfr PN: 335260
Stock: 6

MintCraft BOX-4S-LS-OR Wheelbarrow Parts, For Use With 4 cu-ft Steel Wheelbarrow MintCraft BOX-4S-LS-OR Wheelbarrow Parts, For Use With 4 cu-ft Steel Wheelbarrow
Online
$23.06 for EA
Retail $32.29
Mfr PN: 34567
Stock: 373
Box accessories for 4 cubic feet steel wheelbarrow. 15'' pneumatic tire with inner tube to prevent leaks. For sku no. (599.0148). This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$23.06 for EA
Retail $32.29
Mfr PN: 34567
Stock: 373

Ames 000781VB Wheelbarrow Parts Ames 000781VB Wheelbarrow Parts
Online
$69.29 for EA
Retail $97.09
Mfr PN: 000781VB
Stock: 62
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$69.29 for EA
Retail $97.09
Mfr PN: 000781VB
Stock: 62

IT8CC 8 IN. BLACK INNER TUBE IT8CC 8 IN. BLACK INNER TUBE
Online
$13.30 for 1 EA
Mfr PN: IT8CC
Stock: 13
8" INNER TUBE Replacement inner tube for 8" wheel wheelbarrows Bagged IT8CC 8 IN. BLACK INNER TUBE SIZE:8"
Online
$13.30 for 1 EA
Mfr PN: IT8CC
Stock: 13

36-025 60 IN. WHEELBARROW HANDLE 36-025 60 IN. WHEELBARROW HANDLE
Online
$15.32 for 1 EA
Retail $23.99
Mfr PN: 66545
Stock: 49
WHEELBARROW HANDLE Replacement wheelbarrow handle 60" long: 1-7/16" x 1-3/4" straight pattern Shaped grip end, sand finish Seasoned hardwood 36-025 60 IN. WHEELBARROW HANDLE LENGTH:60"
Online
$15.32 for 1 EA
Retail $23.99
Mfr PN: 66545
Stock: 49

Air Filled Hand Truck Tire with Sawtooth Tread, 4.10/3.50-4" Air Filled Hand Truck Tire with Sawtooth Tread, 4.10/3.50-4"
Online
$13.66 for Each
Retail $15.03
Mfr PN: 20013
Stock: 46

Marathon Industries 4.10/3.50-4" Air Filled Hand Truck Tire

  • Sawtooth Tread
  • 2.25" Offset Hub
  • 1/2" Standard Ball Bearings
  • Mounted on a Single Piece Steel Rim
  • 4-Ply Rubber Tire with Tube
  • Ideal for Hand Trucks, Power Washers, Generators, Air Compressors and other Small Equipment
  • 300 lb. Load Capacity
  • Max 30 psi - Inflate with Manual Pump Only
  • Not for Highway Use

Please follow these three steps to measure your tire accurately.
  1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
  2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
  3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.
Online
$13.66 for Each
Retail $15.03
Mfr PN: 20013
Stock: 46

Arnold TR-82 2-Ply Ribbed Tread Replacement Wheelbarrow Tire, For Use With Wheelbarrows Arnold TR-82 2-Ply Ribbed Tread Replacement Wheelbarrow Tire, For Use With Wheelbarrows
Online
$13.90 for EA
Retail $22.15
Mfr PN: TR-82
Stock: 51
500 pounds load rating. This is a tubeless tire, but a tube can be used in the tire. RIBBED TREAD - 2 PLY Size In=480/400 x 8 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$13.90 for EA
Retail $22.15
Mfr PN: TR-82
Stock: 51

Prosource1602 Wheelbarrow Tire, For Use With 6 cu-ft Steel Wheelbarrow, 16 x 4 in Tire, 6 in L Hub Prosource1602 Wheelbarrow Tire, For Use With 6 cu-ft Steel Wheelbarrow, 16 x 4 in Tire, 6 in L Hub
Online
$39.56 for EA
Retail $53.65
Mfr PN: PR1602
Stock: 755
6'' (15.2cm) hub length. 500 lbs. (225 kgs) load rating. Ribbed tread pattern. Made of polyurethane foam. Steel rim. Tire for 6 cu. ft. wheelbarrows. Replaces wheel on (699.1897). Fits 5/8 diameter axle. Tire Size In=16 x 4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$39.56 for EA
Retail $53.65
Mfr PN: PR1602
Stock: 755

Air Filled Wheelbarrow Tire with Smooth Tread, 4.80/4.00-8" Air Filled Wheelbarrow Tire with Smooth Tread, 4.80/4.00-8"
Online
$18.00 for Each
Retail $19.80
Mfr PN: 20070
Stock: 0

Marathon Industries 4.80/4.00-8" Air Filled Contractor Wheelbarrow Tire

  • Smooth Tread
  • 3" Centered Hub
  • 3/4" Standard Ball Bearing
  • Mounted on a Single Piece Steel Rim
  • 4-Ply Rubber Tire with Tube
  • 400 lb. Weight Capacity
  • Max 30 psi - Inflate with Manual Pump Only
  • Not For Highway Use

Please follow these three steps to measure your tire accurately.
  1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
  2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
  3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.
Online
$18.00 for Each
Retail $19.80
Mfr PN: 20070
Stock: 0

Air Filled Wheelbarrow Tire with Smooth Tread, 4.80/4.00-8" Air Filled Wheelbarrow Tire with Smooth Tread, 4.80/4.00-8"
Online
$18.00 for Each
Retail $19.80
Mfr PN: 20033
Stock: 48

Marathon Industries 4.80/4.00-8" Air Filled Contractor Wheelbarrow Tire

  • Smooth Tread
  • 6" Centered Hub
  • 1" Roller Bearings
  • Mounted on a Single Piece Steel Rim
  • 4-Ply Rubber Tire with Tube
  • 400 lb. Weight Capacity
  • Max 30 psi - Inflate with Manual Pump Only
  • Not For Highway Use

Please follow these three steps to measure your tire accurately.
  1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
  2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
  3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.
Online
$18.00 for Each
Retail $19.80
Mfr PN: 20033
Stock: 48

Prosource CW/GS-3339 Hand Truck Wheel With Tube, For Use With 0011056 and 0017749 Hand Truck, Steel Rim Prosource CW/GS-3339 Hand Truck Wheel With Tube, For Use With 0011056 and 0017749 Hand Truck, Steel Rim
Online
$11.00 for EA
Retail $13.85
Mfr PN: CW/GS-3339
Stock: 767
Steel rimmed, 2-7/32'' (56mm) hub length. 400 lb. (180kgs) load rating. Big sawtooth tread pattern. Pneumatic ball bearing. Replacement wheel for hand truck no. (001.1056 and 001.7749). 5/8'' axle. Tire Size In=10 x 3-1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$11.00 for EA
Retail $13.85
Mfr PN: CW/GS-3339
Stock: 767

8 INCHES FLATFREE KNOBBY TIRE 8 INCHES FLATFREE KNOBBY TIRE
Online
$60.73 for 1 EA
Retail $84.99
Mfr PN: FFTKBCC
Stock: 26
FLAT-FREE KNOBBY SOLID TIRE Wheelbarrow tire with knobby style tread 8" wheel and tire assembly FFTKBCC 8 IN. FLATFREE KNOBBY TIRE
Online
$60.73 for 1 EA
Retail $84.99
Mfr PN: FFTKBCC
Stock: 26

35-026 22 IN. WHEELBARROW WEDGE 35-026 22 IN. WHEELBARROW WEDGE
Online
$7.40 for 1 EA
Mfr PN: 66539
Stock: 14
WHEELBARROW WEDGES Clear waterproof finish 35-026 22 IN. WHEELBARROW WEDGE LENGTH:24"
Online
$7.40 for 1 EA
Mfr PN: 66539
Stock: 14

HAND TRUCK SOLID TIRES 250 LBS HAND TRUCK SOLID TIRES 250 LBS
Online
$35.08 for EA
Retail $38.45
Mfr PN: YY-250-1
Stock: 282
250 lb. capacity. Overall size: 42''Hx18-7/8''Wx 14-3/8''D. Heavy duty 1'' diameter steel frame. Flat free solid rubber tires (8''x2-1/4''). Heavy duty axle. Toe plate 14''Wx7''D. Replacement wheel: sku# 9003518. Red Powder Coated Finish This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$35.08 for EA
Retail $38.45
Mfr PN: YY-250-1
Stock: 282

STUD TIRE 20" X 2.125" STUD TIRE 20" X 2.125"
Online
$40.48 for 4 Each
Retail $60.72
Mfr PN: T20-PSI
Stock: 0
| Replacement tire for Rubber Maid Big Wheel 7.5 Cu. Ft. cart
Online
$40.48 for 4 Each
Retail $60.72
Mfr PN: T20-PSI
Stock: 0

BEEKEEPER JACKET LARGE W/HOOD BEEKEEPER JACKET LARGE W/HOOD
Online
$48.20 for EA
Retail $68.59
Mfr PN: CLOTHSJL-102
Stock: 43
The hooded bee jacket is a quick way to use protective clothing to allow you to inspect your hive and collect honey without the sting; stretch elastic and covered zippers keep you protected and the full mesh hood is structured to keep the mesh and bees co mfortably away from your face. Size=Large This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$48.20 for EA
Retail $68.59
Mfr PN: CLOTHSJL-102
Stock: 43

Prosource CW/W-005P Hand Truck Tire, For Use With 001.1908 Hand Truck, Plastic Rim, Solid Rubber Prosource CW/W-005P Hand Truck Tire, For Use With 001.1908 Hand Truck, Plastic Rim, Solid Rubber
Online
$9.85 for EA
Retail $12.39
Mfr PN: CW/W-005P
Stock: 2164
Plastic rimmed, 2-7/32'' (56mm) hub length. 660 lbs. (300 kgs) load rating. Ribbed tread pattern. Solid ball bearing. Replacement wheel for hand truck no. (001.1908). 5/8'' axle. Tire Size In=10 x 2-1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$9.85 for EA
Retail $12.39
Mfr PN: CW/W-005P
Stock: 2164