AIR TANK VALVE
Use with compressed air tanks
For rapid filling or deflation of air -
tanks and air lines
200 PSI max. pressure
Includes cap and core
29/32" length
1/8" NPT
38-900 1/8 IN. TANK VALVE
|
|
VIAIR tire gauges are accurate to within 1% tolerance acoss the measurement.Get rapid hands-free air down adjustment with easy fine tuning with this gauge from Viair
0 to 60 PSI
Storage Pouch
Rapid, hands free
|
Protect your air tools and compressors with the Buffalo Tools Air Control Unit. This unit will eliminate dust, water and impurities from the air line and extend equipment life and increase efficiency. This is an essential tool to have in your air tool arsenal. Get big power out of a small device with air tools by Buffalo Tools. Air tools are ideal for use in handyman workshops, auto shops, and home garages where an air compressor and hose are within reach of the project. These palm sized devices deliver more power than tools many times their size, without filling your space with bulky items that have to compete for space at the power outlet.
|
Kit contains all accessories needed to connect and use a tank-mounted air compressor. Includes: Couplers/Plugs for air line hose and air tool connections; Air line chuck for filling tire valves; Tire gauge, to check air pressure; Blowgun kit with multiple
nozzles for general cleaning, drying, and clearing; Ball and tapered inflator nozzles for inflating toys and recreational equipment.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Use the brass 2.0mm (.08") tip and needle for a quality finish or on medium to thick viscosity materials. Use with the Spray Station 3500.
|
Includes: 1 piece tapered brass inflator; 1 piece inflation needle; 2 piece 1/4'' female brass plugs; 4 piece 1/4'' male brass plugs; 1 piece dual tire chuck; 1 piece pencil tire gauge; 1 piece brass blow gun; 1 piece brass safety nozzle. 2 piece male bra
ss hose connectors; 1 piece 1/4" quick brass coupler. 1 piece air blow gun; 1 piece female brass hose connector.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
The HV5000/6900 spare 1 qt. Teflon coated paint container is great to have if painting a variety of jobs and to store un-used or pre-mixed paint, as well as different colors.
|
AIR HOSE REPAIR KIT
Use to repair a direct air line hose assembly
Kit includes the following:
One single foot air chuck
One 1/4" female NPT
One male hose end 1/4" ID hose x 1/4" NPT
One hose splicer, 1/4" ID hose
3 band style hose clamps - fits 3/8" ID hose
41-300 AIR HOSE REPAIR KIT
|
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-325 1/4" Male NPT Plug and No.13-335 1/4" Female Coupler. Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industr
ial Interchange and care must be taken to correctly identify. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
1/4" BODY SERIES
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Eliminates kinked and twisted air line hose by swiveling a full 360 degrees. Use on air lines, tools, and compressor connections to increase flexibility and convenience. 150 PSI maximum working pressure.
MPT x FPT In.=1/4M x 1/4F
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Place your air source just about anywhere you want it with this relocation kit from VIAIR.
Contains
1/4 NPT Female Coupler
1/4 NPT Male Stud
two 1/4" NPT male compression fittings
15 ft. of air line tubing
3 air line clips
4 continuous grommets
|
Use the brass 1.5mm (.06") tip and needle for a fine finish or on thin to medium viscosity materials. Use with the Spray Station 3500.
|
The HV3500 spare 1 qt. wide-mouth paint container (with lid) is great to have if painting a variety of jobs and to store un-used or pre-mixed paint, as well as different colors.
|
Air compressor pressure switch suitable for small electrically driven air compressors, includes a two way pressure release valve. Contacts open on rising pressure. 2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm ac
tuated, UL/CSA Listed, RoHS compliant. Non adjustable differential 30 PSIG Adjustable Cut out range 70-150 PSIG 1.5 HP @115Vac, 2 HP @230Vac. Individially boxed.
Off At PSI=150
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Use the brass 1.0mm (.04") tip and needle for an extra fine finish or on thin viscosity materials, especially water based finishes. Use with the Spray Station 3500.
|
AIR TOOL OILER Oilers fasten directly to air tool Precisely meters proper amount of oil to tool 1/4" male NPT outlet, 1/4" female NPT inlet Fits air tools requiring 1/4" air lines Prevents burn-out of expensive tools Stops rust Increases torque up to 25% 41-101 AIR TOOL OILER
|
Use the stainless steel 2.0mm (.08") tip and needle for a quality finish or on medium to thick viscosity materials. Use with the Spray Station 5000/6900.
|
1/4" FEMALE T-STYLE TRU-FLATE COUPLER
1/4" female NPT - T-Style coupler
Coupler has one narrow band to identify -
Tru-Flate design
Utilizes a tubular valve that supports the seal
Allows more air flow at lower pressure drops
Collar prevents accidental disconnect
Maximum rated working pressure of 300 PSI
Carded
13-135 TRU-FLATE DESIGN COUPLR
SIZE:1/4" Female NPT
DESC:T-Style
|
Use the brass 3.0mm (.12") tip and needle for a coarse finish or on medium to thick viscosity materials. Use with the Spray Station 3500.
|
T-STYLE TRU-FLATE 1/4" COUPLER/PLUG SET
Set includes one each of the following:
1/4" female NPT coupler (13-135)
1/4" male NPT nipple (12-125)
Nipple recognized for extremely short pilot & -
wide metal section between ball groove & pilot
Coupler utilizes tubular valve
Valve supports seal and allows more air flow
Carded
13-101 TRU-FLATE COUPLER SET
SIZE:1/4" NPT
DESC:T-Style
|
The HV1900spare 1 qt. paint container (with lid) is great to have if painting a variety of jobs and to store un-used or pre-mixed paint, as well as different colors.
|
Use the brass 2.0mm (.08") tip and needle for a quality finish or on medium to thick viscosity materials. Use with the Spray Station 1900.
|
Contains all o-rings necessary to rebuild the F21, F28, F33, N89C tools. Does not include trigger valve or trigger valve o-rings.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
|
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for comp
ressed air lines only. 300 PSI maximum rated working pressure.
NPT In=1/4Body Series In.=3/8
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line p
ressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
1/2" BODY SERIES
NPT In=1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Air compressor pressure switch suitable for small electrically driven air compressors, includes a two way pressure release valve. Contacts open on rising pressure. 2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm ac
tuated, UL/CSA Listed, RoHS compliant. Non adjustable differential 30 PSIG Adjustable Cut out range 70-150 PSIG 1.5 HP @115Vac, 2 HP @230Vac. Individially boxed.
Off At PSI=125
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
(1) One Each: 1/4" FPT Coupler (13-235), 1/4" MPT Coupling (21-505), 1/4" MPT Plug (12-225) and 1/4" FPT Plug (12-235).
1/4" BODY SERIES
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
1/4" MALE I/M STYLE MILTON COUPLER
1/4" male NPT coupler - Industrial/Milton design
Identify by 2 narrow bands around coupler
Use with 12-225 nipple
Max. rated working pressure of 300 PSI
Carded
13-225 INDUSTRIAL COUPLER
SIZE:1/4" Male NPT
DESC:I/M Style
|
REGULATOR AND GAUGE KIT
1/4" NPT regulator & gauge kit for use -
with Bostitch air compressors
Regulates air pressure from your compressor -
to match the recommended air pressure required-
by your air tool
Air flow must be in direction of the arrow
15 GPM rating
0-160 pressure gauge
BTFP72326 RGULATOR GAUGE KIT
|
|
|
|
|
Copyright © 1999-2019 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |