Raindrip 15600UB Adjustable Stream Bubbler, 0 - 13 gph, 1/4 in Barb Raindrip 15600UB Adjustable Stream Bubbler, 0 - 13 gph, 1/4 in Barb
Online
$1.26 for EA
Retail $1.55
Mfr PN: 15600UB
Stock: 2823
Convert existing 1/2'' underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3' at 30 PSI or for finer water droplets, a fan spray, with spray diameter up to 13' at 30 PSI. Bubbler flow rates are adjustable from 0-13 GPH at 30 PSI for stream type, and from 0-24 GPH at 30 PSI for the fan spray. These features allow the higher flow rates required when watering large and small plants on the s ame circuit. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$1.26 for EA
Retail $1.55
Mfr PN: 15600UB
Stock: 2823

COUPLING COMPRESSOR 5/8IN COUPLING COMPRESSOR 5/8IN
Online
$0.95 for EA
Retail $1.15
Mfr PN: 345G00UB
Stock: 1411
Join or connect two lengths of line. Made from ABS. For water pressure up to 60 PSI. Ends are color coded for easy size identification. 5/8" compression coupling for use with 5/8" (.690"-.700" O.D.) hose only. Black Compression Ring This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$0.95 for EA
Retail $1.15
Mfr PN: 345G00UB
Stock: 1411

Genova 77132 Left Side Inlet DWV Sanitary Pipe Tee, 3 x 3 x 2 in, Hub, SCH 40, PVC Genova 77132 Left Side Inlet DWV Sanitary Pipe Tee, 3 x 3 x 2 in, Hub, SCH 40, PVC
Online
$10.07 for EA
Retail $15.95
Mfr PN: 77132
Stock: 817
Used for connecting 2" vent or branch waste pipe to a vertical pipe (stack). LEFT SIDE INLET Size In=3 x 3 x 3 x 2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$10.07 for EA
Retail $15.95
Mfr PN: 77132
Stock: 817

Genova 32705 Pipe Street Elbow, 90 deg, 1/2 in, MIP x FIP, SCH 40, PVC Genova 32705 Pipe Street Elbow, 90 deg, 1/2 in, MIP x FIP, SCH 40, PVC
Online
$0.73 for EA
Retail $1.15
Mfr PN: 32705
Stock: 682
Used to change direction in piping. Adapts to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Meets ASTM D2466. NSF listed. White Size In=1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$0.73 for EA
Retail $1.15
Mfr PN: 32705
Stock: 682

Speedfit PSEI Tube To Pipe Elbow, 1/2 in, CTS X MNPT, 160 psi, Plastic, White, 73 deg F Speedfit PSEI Tube To Pipe Elbow, 1/2 in, CTS X MNPT, 160 psi, Plastic, White, 73 deg F
Online
$4.72 for EA
Retail $5.15
Mfr PN: PSEI482024P
Stock: 473
Speedfit secure fittings manufactured from high-quality engineered plastic with EPDM O-Rings. Suitable for hot and cold water plumbing applications. Can be used with Copper, PEX and CPVC Pipe. Approved for behind the wall installation. CTS x NPT In=1/2 x 1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$4.72 for EA
Retail $5.15
Mfr PN: PSEI482024P
Stock: 473

160-104 3/4 PVC COMP COUPLING 160-104 3/4 PVC COMP COUPLING
Online
$3.13 for 1 EA
Retail $4.39
Mfr PN: 160-104
Stock: 399
160-104 3/4 PVC COMP COUPLING
Online
$3.13 for 1 EA
Retail $4.39
Mfr PN: 160-104
Stock: 399

160-105 1 IN. PVC COMP COUPLING 160-105 1 IN. PVC COMP COUPLING
Online
$4.02 for 1 EA
Retail $5.99
Mfr PN: 160-105
Stock: 389
160-105 1 IN. PVC COMP COUPLING
Online
$4.02 for 1 EA
Retail $5.99
Mfr PN: 160-105
Stock: 389

2IDX20 PVC SDR26 PRESSURE PIPE 2IDX20 PVC SDR26 PRESSURE PIPE
Online
$51.20 for 5 LGTH
Retail $64.45
Mfr PN: 34022
Stock: 298
SDR 26 - 1 BELLED END 20' Lengths ize In=2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$51.20 for 5 LGTH
Retail $64.45
Mfr PN: 34022
Stock: 298

160-108 2 IN. PVC COMP COUPLING 160-108 2 IN. PVC COMP COUPLING
Online
$8.11 for 1 EA
Retail $12.99
Mfr PN: 160-108
Stock: 284
160-108 2 IN. PVC COMP COUPLING
Online
$8.11 for 1 EA
Retail $12.99
Mfr PN: 160-108
Stock: 284

ELL SCH80 PVC 90DEG 1 IN SXFIP ELL SCH80 PVC 90DEG 1 IN SXFIP
Online
$3.15 for EA
Retail $7.15
Mfr PN: 339108
Stock: 259
Used to change direction in piping. PTFE thread tape is recommended for threaded joints, Slip x FIP In=1 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$3.15 for EA
Retail $7.15
Mfr PN: 339108
Stock: 259

ABS-DWV ELBOW STREET 2IN ABS-DWV ELBOW STREET 2IN
Online
$3.53 for EA
Retail $5.09
Mfr PN: 85820
Stock: 211
Used to change direction in piping. Sometimes called a "Street Sixteenth Bend". Size In=2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$3.53 for EA
Retail $5.09
Mfr PN: 85820
Stock: 211

Genova 85815 DWV Pipe Street Elbow, 22-1/2 deg, 1-1/2 in, Hub x Spigot, ABS Genova 85815 DWV Pipe Street Elbow, 22-1/2 deg, 1-1/2 in, Hub x Spigot, ABS
Online
$3.87 for EA
Retail $5.19
Mfr PN: 85815
Stock: 210
Used to change direction in piping. Sometimes called a "Street Sixteenth Bend". Size In=1-1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$3.87 for EA
Retail $5.19
Mfr PN: 85815
Stock: 210

160-106 1-1/4 PVC C COUPLING 160-106 1-1/4 PVC C COUPLING
Online
$5.38 for 1 EA
Retail $7.99
Mfr PN: 160-106
Stock: 197
160-106 1-1/4 PVC C COUPLING
Online
$5.38 for 1 EA
Retail $7.99
Mfr PN: 160-106
Stock: 197

160-103 1/2 PVC COMP COUPLING 160-103 1/2 PVC COMP COUPLING
Online
$2.52 for 1 EA
Retail $3.59
Mfr PN: 160-103
Stock: 197
160-103 1/2 PVC COMP COUPLING
Online
$2.52 for 1 EA
Retail $3.59
Mfr PN: 160-103
Stock: 197

Genova 34157 Pipe Reducing Elbow, 90 deg, 1/2 x 3/4 in, Slip x FIP, SCH 40, PVC Genova 34157 Pipe Reducing Elbow, 90 deg, 1/2 x 3/4 in, Slip x FIP, SCH 40, PVC
Online
$0.73 for EA
Retail $1.49
Mfr PN: 34157
Stock: 195
Used to change direction in piping and reduce size. Adapts from solvent welded line to standard male pipe threads. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Size In=1/2 X 3/4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$0.73 for EA
Retail $1.49
Mfr PN: 34157
Stock: 195

Genova 800 Swivel Tray Plug Pipe Adapter, 1-1/2 in, Hub X FIP, ABS Plastic Genova 800 Swivel Tray Plug Pipe Adapter, 1-1/2 in, Hub X FIP, ABS Plastic
Online
$3.15 for EA
Retail $4.59
Mfr PN: 88915
Stock: 186
Used to connect laundry tray to drain. Size=1-1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$3.15 for EA
Retail $4.59
Mfr PN: 88915
Stock: 186

160-107 1-1/2 PVC C COUPLING 160-107 1-1/2 PVC C COUPLING
Online
$6.25 for 1 EA
Retail $8.99
Mfr PN: 160-107
Stock: 183
160-107 1-1/2 PVC C COUPLING
Online
$6.25 for 1 EA
Retail $8.99
Mfr PN: 160-107
Stock: 183

John Guest Speedfit PPSV501222WP Push Fit Elbow Shut-Off Valve, 3/8 X 1/4 in, Tube OD X NPTF, 150 psi, Polypropylene John Guest Speedfit PPSV501222WP Push Fit Elbow Shut-Off Valve, 3/8 X 1/4 in, Tube OD X NPTF, 150 psi, Polypropylene
Online
$7.10 for EA
Retail $7.75
Mfr PN: PPSV501222WP
Stock: 182
Reverse Osmosis storage tank valve. Produced in polypropylene and fitted with EPDM o-rings, more chemically resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems. Sizes indicated are Tube OD x Thread NPTF Size In=3/8 x 1/4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$7.10 for EA
Retail $7.75
Mfr PN: PPSV501222WP
Stock: 182

Speedfit PSEI012026P Push-Fit Tube To Pipe Adapter, 1/2 X 3/4 in, CTS X MNPT, 160 psi, 200 deg F, Plastic, White Speedfit PSEI012026P Push-Fit Tube To Pipe Adapter, 1/2 X 3/4 in, CTS X MNPT, 160 psi, 200 deg F, Plastic, White
Online
$5.67 for EA
Retail $6.19
Mfr PN: PSEI012026P
Stock: 174
Speedfit secure fittings manufactured from high-quality engineered plastic with EPDM O-Rings. Suitable for hot and cold water plumbing applications. Can be used with Copper, PEX and CPVC Pipe. Approved for behind the wall installation. CTS x NPT In=1/2 x 3/4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$5.67 for EA
Retail $6.19
Mfr PN: PSEI012026P
Stock: 174

ABS SANITARY TEE 1-1/2IN ABS SANITARY TEE 1-1/2IN
Online
$3.58 for EA
Retail $4.85
Mfr PN: 86115
Stock: 174
Used when connecting a branch line into a vertical drain pipe. Size In=1-1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$3.58 for EA
Retail $4.85
Mfr PN: 86115
Stock: 174

Speedfit PSEI4628P Test End Cap, 3/4 in, CTS Push-Fit, White Speedfit PSEI4628P Test End Cap, 3/4 in, CTS Push-Fit, White
Online
$4.69 for EA
Retail $5.15
Mfr PN: PSEI4628P
Stock: 170
Twist & Lock manufactured from high-quality engineered plastic with EPDM O-Rings. Suitable for hot and cold water plumbing applications. Can be used with Copper, PEX and CPVC Pipe. Approved for behind the wall installation CTS In=3/4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$4.69 for EA
Retail $5.15
Mfr PN: PSEI4628P
Stock: 170

Genova 800 Solvent Weld Counter Sunk Plug, 3 in, MIP, SCH 40, ABS Genova 800 Solvent Weld Counter Sunk Plug, 3 in, MIP, SCH 40, ABS
Online
$2.81 for EA
Retail $7.65
Mfr PN: 81853
Stock: 168
Used to form a removable closure. These threaded plugs offer a corrosion proof alternative to metal plugs. Size In=3 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$2.81 for EA
Retail $7.65
Mfr PN: 81853
Stock: 168

Speedfit PEI Tube Reducing Elbow With EPDM O-Ring, 3/4 X 1/2 in, CTS, 160 psi, Plastic, White, 73 deg F Speedfit PEI Tube Reducing Elbow With EPDM O-Ring, 3/4 X 1/2 in, CTS, 160 psi, Plastic, White, 73 deg F
Online
$8.54 for EA
Retail $10.05
Mfr PN: PEI212820P
Stock: 165
Twist & Lock manufactured from high-quality engineered plastic with EPDM O-Rings. Suitable for hot and cold water plumbing applications. Can be used with Copper, PEX and CPVC Pipe. Approved for behind the wall installation Size CTS In=3/4 x 1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$8.54 for EA
Retail $10.05
Mfr PN: PEI212820P
Stock: 165

Speedfit PSEI4620P Test End Cap, 1/2 in, CTS Push-Fit, 160 psi, 200 deg F, Polysulfone, White Speedfit PSEI4620P Test End Cap, 1/2 in, CTS Push-Fit, 160 psi, 200 deg F, Polysulfone, White
Online
$2.90 for EA
Retail $2.95
Mfr PN: PSEI4620P
Stock: 153
Twist & Lock manufactured from high-quality engineered plastic with EPDM O-Rings. Suitable for hot and cold water plumbing applications. Can be used with Copper, PEX and CPVC Pipe. Approved for behind the wall installation CTS In=1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$2.90 for EA
Retail $2.95
Mfr PN: PSEI4620P
Stock: 153

Speedfit PEI Pipe Elbow With EPDM O-Ring, 90 deg, 1/2 in, FNPT, 160 psi, Plastic Speedfit PEI Pipe Elbow With EPDM O-Ring, 90 deg, 1/2 in, FNPT, 160 psi, Plastic
Online
$6.20 for EA
Retail $6.79
Mfr PN: PEIBTC2034P
Stock: 151
Twist & Lock manufactured from high-quality engineered plastic with EPDM O-Rings. Suitable for hot and cold water plumbing applications. Can be used with Copper, PEX and CPVC Pipe. Approved for behind the wall installation CTS x NPS In=1/2 x 1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$6.20 for EA
Retail $6.79
Mfr PN: PEIBTC2034P
Stock: 151

Genova 800 Solvent Weld Counter Sunk Plug, 2 in, MIP, SCH 40, ABS Genova 800 Solvent Weld Counter Sunk Plug, 2 in, MIP, SCH 40, ABS
Online
$1.73 for EA
Retail $3.55
Mfr PN: 81852
Stock: 146
Used to form a removable closure. These threaded plugs offer a corrosion proof alternative to metal plugs. Size In=2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$1.73 for EA
Retail $3.55
Mfr PN: 81852
Stock: 146

Speedfit PSEI012024P Push-Fit Tube To Pipe Adapter, 1/2 in, CTS X MNPT, 160 psi, 200 deg F, Plastic, White Speedfit PSEI012024P Push-Fit Tube To Pipe Adapter, 1/2 in, CTS X MNPT, 160 psi, 200 deg F, Plastic, White
Online
$4.49 for EA
Retail $4.95
Mfr PN: PSEI012024P
Stock: 142
Speedfit secure fittings manufactured from high-quality engineered plastic with EPDM O-Rings. Suitable for hot and cold water plumbing applications. Can be used with Copper, PEX and CPVC Pipe. Approved for behind the wall installation. CTS x NPT In=1/2 x 1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$4.49 for EA
Retail $4.95
Mfr PN: PSEI012024P
Stock: 142

John Guest PPSV040808WP 1/4 Turn Straight Stop Valve, 1/4 in, Push-Fit, 150 psi, Polypropylene Body, White John Guest PPSV040808WP 1/4 Turn Straight Stop Valve, 1/4 in, Push-Fit, 150 psi, Polypropylene Body, White
Online
$6.18 for EA
Retail $6.75
Mfr PN: PPSV040808WP
Stock: 141
Produced in polypropylene and fitted with EPDM o-rings, more chemically resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems. Tube OD In=1/4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$6.18 for EA
Retail $6.75
Mfr PN: PPSV040808WP
Stock: 141

Genova 800 Dwv Pipe Adapter Bushing, 3 in, DWV Spigot X Sewer and Drain Hub, ABS Genova 800 Dwv Pipe Adapter Bushing, 3 in, DWV Spigot X Sewer and Drain Hub, ABS
Online
$3.12 for EA
Retail $5.49
Mfr PN: 85330
Stock: 139
Adapts ABS I.P.S. (800 series) hub to sewer (400/600 series) pipe. Size In=3 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$3.12 for EA
Retail $5.49
Mfr PN: 85330
Stock: 139

TEE SCH80 PVC 1/2 SLP TEE SCH80 PVC 1/2 SLP
Online
$1.86 for EA
Retail $4.05
Mfr PN: 314058
Stock: 134
Used to change direction in piping. Slip In=1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$1.86 for EA
Retail $4.05
Mfr PN: 314058
Stock: 134

PLUG SCH80 PVC 1/2 MIP PLUG SCH80 PVC 1/2 MIP
Online
$0.90 for EA
Retail $2.45
Mfr PN: 318058
Stock: 134
Adapts to standard female pipe threads. PTFE thread tape is recommended for threaded joints. MIP In=1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$0.90 for EA
Retail $2.45
Mfr PN: 318058
Stock: 134

Genova 82521 DWV Pipe Reducing Tee-Wye, 2 x 2 x 1-1/2 in, Hub, SCH 40, ABS Genova 82521 DWV Pipe Reducing Tee-Wye, 2 x 2 x 1-1/2 in, Hub, SCH 40, ABS
Online
$4.26 for EA
Retail $5.29
Mfr PN: 82521
Stock: 134
Used in some plumbing code areas to connect a reducing branch line into a vertical drain pipe instead of a conventional tee fitting. Also is the acceptable method of a connecting a horizontal branch pipe approaching a horizontal drain pipe on the perpendi cular. Can be made from a wye and a street eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Size In=2 x 2 x 1-1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$4.26 for EA
Retail $5.29
Mfr PN: 82521
Stock: 134