| Floor Tray Used To Protect Floor and Catch Leaks | Includes Floor Drain Options | Measures Approximately 29" X 31" X 2"
|
| 27" X 29" Bottom, 30" X 32" Top | High Impact Plastic - Will Not Rust | Protection From Washing Machine Overflow Or Hose Failure | Drilled For Side Outlet | 1" PVCFitting Furnished
|
|
NO-BURST WASHING MACHINE HOSE
Flexible braided stainless-steel
Tough & dependable
High-pressure hose
For hot & cold connections
Easily replaces rubber hoses
5 year warranty
9WM48 4 FT. WASHING MACHINE HOSE
SIZE:4 Ft.
DESC:Sleeve
|
29" x 31" standard washing machine tray; Protects floors from overflow & scuffs; Standard
|
4" dryer offset connector; Fire-resistant; Solves tight space venting problems; Vertical, horizontal or diagonal installation; Fits any type of dryer back; 3000 series aluminum with .014" - .016" thickness; Easy to install
|
| Remote mounted electric pump and motor assembly with mounting bracket| This pump is for the new style GE, Hotpoint, and RCA washers (after 1995)| Previous part number: WH23X10003| 175D4054A001 manufacturing number on pump| 143B9643P001 manufacturing number on mounting bracket
|
(The Vent Bucket is ideal to use in a laundry space without outdoor venting. It is also a lint trapper and works with most electric clothes dryers. The air is vented from the dryer through the exhaust hose into the vent bucket. Water is filled at the bottom which catches the lint. The louvers at the top exhaust the cooled air into the room. Quick and easy installation with standard 4 inch hose to fit all clothes dryers, except gas clothes dryers. Included in the kit is the vent bucket, 5 feet length Supurr-Flex Metallic Duct and 2 Clamps. For indoor use only. Measures 10.5 in. W x 0.75 D x 5 in H. Ideal for apartments, condominiums, and RVs.÷
|
Dryer Lint Filter.
|
31" x 36" oversized washing machine tray; Protects floors from overflow & scuffs; Oversized
|
| Fits most major brands | Everything you need for easy installation | (1) 8' long 4" diameter vent connector | (2) 4" vent clamps
|
| 60 Inch | 4 Way Rubber Expansion End | Fits 1", 1-1/8" and 1-1/4" | Corrugated High Density Polypropylene Hose | Hose Clamp Included
|
Kit includes: | 5/8" x 48" stainless-steel gas connector | Two 1/2" male pipe threads (tapped 3/8" female pipe thread), one 3/4" male pipe thread (tapped 1/2" female pipe thread), pipe thread sealant, leak test solution | Installation Guide
|
Strain-relief clamp for dryer cords
|
Ge Dryer Lint Filter. For Gas and Electric Dryers 1957 To Present. Replaces Mfg. #We18X26.
|
With twist tie.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
| Stainless Steel | 2000 Lb. Burst Pressure At Ambient Temperature | 300 Lb. Working Pressure At 125°F | 500 Lb. Working Pressure At 72°F | 3/4" Female Swivel Hose Couplings with Cone Washer Seals
|
| One piece design and raised drip guard contains and sends valve or washing machine hose leaks down the drain | Factory installed 1/4 turn valves | Various mounting options allow dual drain or right and left drain | Box can be inverted for top mount valve/center drain option | 2" right and left drain couplings with knock out test caps | Dual drain prevents supply lines from crossing p-trap | Interchangeable with box | Face plate included | IPS WATER TITE washing machine faceplace included
|
| Stainless Steel | 2000 Lb. Burst Pressure At Ambient Temperature | 300 Lb. Working Pressure At 125°F | 500 Lb. Working Pressure At 72°F | 3/4" Female Swivel Hose Couplings with Cone Washer Seals
|
Kit includes: | 48" stainless steel gas connector, 3 fittings, pipe thread sealant and leak test solution | Installation Guide
|
2 pack of 4 ft. polymer coast washer hoses|Replacement for deteriorated hoses|Change out every 2-5 years|Compatible with all major brands of washers| ge| general| electric| wx14x10005| laundry| appliance| accessory| accessories| washer| washing| machine| water| braided| inlet| hose| hoses Package Contents: washer hoses|manual|warranty This item cannot be shipped to APO/FPO addresses
|
Form fitted ; Heavy-duty filler for extra padding; Orange binding trim; Weight: 6.7lbs; Dim: 34"H x 28"W x 46"D
|
The 4' Dryer Cord has a 3 prong plug and includes an adjustable strain relief bracket. The cord has ring terminal connectors that ensure the cord stays connected, and the heavy duty insulation prevents kinking and cracking for long-lasting durability. This UL-listed cord is stringently tested for household safety
|
Whirlpool Dryer Lint Screen. For Gas Or Electric Dryers, 1964 To Present. Mfg. #339392 and 690634.
|
| Dryer extension clamp
|
| 24" x 24" welded wire frame - galvanized fine mesh | Fits: 24" x 24" Loadstar 30 lbs. 1 & 2 and 37 AB (50 lbs.) | Replaces ST73
|
White Outside Vent Kit:Easy to install curved louvers with flexible Metallic Vent Hose of 5 ft. length 4" diam with 2 ties.
|
| Genuine GE factory part | Timer knob for GE 6.0 CU FT dryer part number GTDX180EDWW and GTDX180GDWW
|
| Replaces whirlpool 279838
|
| Stainless Steel | 2000 Lb. Burst Pressure At Ambient Temperature | 300 Lb. Working Pressure At 125°F | 500 Lb. Working Pressure At 72°F | 3/4" Female Swivel Hose Couplings with Cone Washer Seals
|
• 2-piece clamp ;• Relieves pressure on power cord to keep interior connection solid ;• Protects cord against damage caused by pulling, stretching or sideways motion ;• Includes 2 screws ;• 5-year warranty;
|
Braided stainless steel washing machine hose; 3/4" FGH x 3/4" FGH; UPC ; 72"
|
|
|
|
|
Copyright © 1999-2019 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |