HD SPRING (BULK) HD SPRING (BULK)
Online
$11.28 for Each
Retail $15.80
Mfr PN: JBC305
Stock: 123
HD SPRING (BULK)
Online
$11.28 for Each
Retail $15.80
Mfr PN: JBC305
Stock: 123

LIGHT DUTY SPRING LIGHT DUTY SPRING
Online
$6.00 for Each
Retail $7.80
Mfr PN: AUD306
Stock: 114
LIGHT DUTY SPRING
Online
$6.00 for Each
Retail $7.80
Mfr PN: AUD306
Stock: 114

Victor 22-1-35527-8 Steering Wheel Handle, Black Victor 22-1-35527-8 Steering Wheel Handle, Black
Online
$7.42 for EA
Retail $9.19
Mfr PN: 22-1-35527-8
Stock: 94
Personalizes vehicle and provides alternative methods for steering. Universal design to fit most vehicles. Easy to install. All installation hardware included. Color=Black This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$7.42 for EA
Retail $9.19
Mfr PN: 22-1-35527-8
Stock: 94

ALCOA HUB COVER SYSTEM DRIVE ALCOA HUB COVER SYSTEM DRIVE
Online
$50.66 for Each
Retail $76.00
Mfr PN: 4877152
Stock: 73
ALCOA HUB COVER SYSTEM DRIVE
Online
$50.66 for Each
Retail $76.00
Mfr PN: 4877152
Stock: 73

Work Truck Steps - Grip Strut 12" Step Hands Free - Black Powder Coat/Galvanized - Single Work Truck Steps - Grip Strut 12" Step Hands Free - Black Powder Coat/Galvanized - Single
Online
$334.74 for Each
Retail $334.74
Mfr PN: 501030
Stock: 52
WTS - Grip Strut 12" Step Hands Free - Black Powder Coat/Galvanized - Single

Features

  • Hands-free operation
  • Fully assembled
  • 500 lb. weight capacity
  • Easy to install and use
  • Conveniently tucked away when not in use
  • Interior steel straps for additional strength
  • When in the out position, both feet fit on the step
  • Large 24" or 12" non-skid step surface for increased safety
  • Limited lifetime warranty on all materials and craftsmanship
Notes: Part numbers 501010, 501020 and 501030 will not fit a traditional pickup truck bed. They only fit commerical, industrial, utility, fire prevention and service trucks that have service truck side tool boxes with flat bottoms or a flat platform area that has access to both sides of the mounting area.
Online
$334.74 for Each
Retail $334.74
Mfr PN: 501030
Stock: 52

HUB CAP FRONT SS 6 NOTCH CDED HUB CAP FRONT SS 6 NOTCH CDED
Online
$4.61 for Each
Retail $6.00
Mfr PN: 488806
Stock: 50
HUB CAP FRONT SS 6 NOTCH CDED
Online
$4.61 for Each
Retail $6.00
Mfr PN: 488806
Stock: 50

NAIL SDG COIL RING SS 1-3/4IN NAIL SDG COIL RING SS 1-3/4IN
Online
$60.45 for BX18C
Retail $75.99
Mfr PN: C5R90BDSS-316
Stock: 37
Information on nail compatibility is available online at www.bostitch.com. STAINLESS STEEL Ring Shank Dia x Lgth In=.090 x 1-3/4Count=18C This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$60.45 for BX18C
Retail $75.99
Mfr PN: C5R90BDSS-316
Stock: 37

Dana 30 HD Lower Control Arm Brackets Dana 30 HD Lower Control Arm Brackets
Online
$82.85 for EA
Retail $84.19
Mfr PN: TJ3011
Stock: 24
Do you have bent and mangled factory lower control arm brackets? Its no surprise since they are practically made of sheet metal. These heavy duty brackets replace the factory brackets so you'll never have to worry about ripping off a bracket again. But what makes ours better? Instead of making an exact copy of the factory bracket, we added some features to actually improve the functionality. Includes a Horseshoe around CAM bolt is laser etched with factory alignment lines for easy adjustments. The style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off. The bracket wraps around axle tube more than factory for additional weld surface area, which significantly reduces the chance the bracket can rip off. These brackets require general welding and fabrication skills. Fits TJ, LJ XJ, MJ and ZJ Dana 30 Axles Made from 1/4" steel plate 2.625" mounting width Grease fitting access Bare steel Sold as a pair
Online
$82.85 for EA
Retail $84.19
Mfr PN: TJ3011
Stock: 24

HUB KIT HI SPD KIT 5 BOLT HUB KIT HI SPD KIT 5 BOLT
Online
$45.06 for EA
Retail $56.79
Mfr PN: H-545UHI-B
Stock: 21
Fits 1-3/8-inch inner 1-1/16 outer spindle, includes bearings, seals, cap and studs. No Bolts=5 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$45.06 for EA
Retail $56.79
Mfr PN: H-545UHI-B
Stock: 21

LCA BRACKETS LCA BRACKETS
Online
$68.00 for EA
Retail $76.54
Mfr PN: JK4412
Stock: 20
Do you have bent and mangled factory lower control arm brackets? Its no surprise since they are practically made of sheet-metal. These HEAVY DUTY brackets replace the factory brackets so you'll never have to worry about ripping off a bracket again. Bracket wraps around axle tube more than factory for additional weld surface area, which significantly reduces the chance the bracket can rip off.
Online
$68.00 for EA
Retail $76.54
Mfr PN: JK4412
Stock: 20

NAIL SDG COIL RING SS 2-1/2IN NAIL SDG COIL RING SS 2-1/2IN
Online
$97.38 for BX18C
Retail $122.45
Mfr PN: C8R90BDSS-316
Stock: 10
Information on nail compatibility is available online at www.bostitch.com. STAINLESS STEEL Ring Shank Dia x Lgth In=.090 x 2-1/2Count=18C This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$97.38 for BX18C
Retail $122.45
Mfr PN: C8R90BDSS-316
Stock: 10

PAC WRIP Steering Wheel & Wireless Remote Interface for Pioneer PAC WRIP Steering Wheel & Wireless Remote Interface for Pioneer
Online
$22.03 for EA
Retail $49.99
Mfr PN: WRIP
Stock: 5
Plugs into wired remote input on rear of Pioneer(R) aftermarket radios; Provides wireless IR receiver for wireless remote compatibility
Online
$22.03 for EA
Retail $49.99
Mfr PN: WRIP
Stock: 5

D60 KNUCKLE BOLT KIT D60 KNUCKLE BOLT KIT
Online
$49.42 for EA
Retail $53.57
Mfr PN: HS6081
Stock: 3
This Knuckle Bolt Kit is designed to work specifically with Artec Ultimate Dana 60 High Steer Arms to both strengthen the entire knuckle and steering as well as provide options for mounting your steering. Whether you just need to re-enforce your knuckle or want to run your tie rod in double sheer, this kit is designed with to fit multiple different steering configurations. The Knuckle Bolt Kit includes one 3/4" grade 8 bolt, one 3/4" all- steel mechanical locking nut, and one 1.25" outer diameter, .250" wall sleeve . Two kits will need to be purchased for a pair of high steer arms. This kit will require cutting the sleeve in half to run heim in double sheer. Factory knuckle hole will need to be drilled to 3/4 hole. Knuckle and high steer arm are SOLD SEPARATELY. Image is for illustrative purposes only.
Online
$49.42 for EA
Retail $53.57
Mfr PN: HS6081
Stock: 3

A-ARM SKIDS A-ARM SKIDS
Online
$355.84 for EA
Retail $390.43
Mfr PN: TY6805
Stock: 3
Toyota 4Runner 5th Gen A-Arm Skids. Heavy Duty yet Light weight protection for your vulnerable lower A-arms
Online
$355.84 for EA
Retail $390.43
Mfr PN: TY6805
Stock: 3

1.25IN-12 TPI-TUBE ADAPTE 1.25IN-12 TPI-TUBE ADAPTE
Online
$23.40 for EA
Retail $25.56
Mfr PN: TA2001R
Stock: 2
Tube adapter to attach your links to the rod ends.
Online
$23.40 for EA
Retail $25.56
Mfr PN: TA2001R
Stock: 2

COILOVER TABS FOR TRUSS COILOVER TABS FOR TRUSS
Online
$20.05 for EA
Retail $23.57
Mfr PN: TB1009
Stock: 2
These tabs allow you to mount your shocks or coilovers near the very ends of your axle for maximum stability. They are intended for use with our Front Dana 60 truss - bridging the gap between the inner "c" and the truss, reinforcing the entire axle against bending or breaking. Made from CNC cut 1/4" thick mild steel, these tabs are a great addition to your truss system. Includes 1/2" hole common to most shocks and are intended to be mounted 1.25" apart. Includes 4 pieces for use with two shocks.
Online
$20.05 for EA
Retail $23.57
Mfr PN: TB1009
Stock: 2

SD XO STEERING KIT 7/8RE SD XO STEERING KIT 7/8RE
Online
$387.46 for EA
Retail $425.15
Mfr PN: SK1402
Stock: 2
Online
$387.46 for EA
Retail $425.15
Mfr PN: SK1402
Stock: 2

Tube Adapter Tube Adapter
Online
$23.40 for EA
Retail $25.56
Mfr PN: TA2001L
Stock: 1
Tube adapter to attach your links to the rod ends.
Online
$23.40 for EA
Retail $25.56
Mfr PN: TA2001L
Stock: 1

1.25IN ROD END LH3/4IN 1.25IN ROD END LH3/4IN
Online
$94.88 for EA
Retail $102.06
Mfr PN: RE2012
Stock: 1
Online
$94.88 for EA
Retail $102.06
Mfr PN: RE2012
Stock: 1

COIL/LCA COMBO FA-CAM COIL/LCA COMBO FA-CAM
Online
$305.84 for EA
Retail $490.31
Mfr PN: TJ3017
Stock: 1
Online
$305.84 for EA
Retail $490.31
Mfr PN: TJ3017
Stock: 1

REAR UCA BRACKETS REAR UCA BRACKETS
Online
$68.00 for EA
Retail $76.54
Mfr PN: JK4424
Stock: 1
Do you have bent and mangled factory upper control arm brackets? It's no surprise since they are practically made of sheet-metal. These heavy-duty brackets replace the factory brackets so you'll never have to worry about ripping off a bracket again. Bracket wraps around axle tube more than factory for additional weld surface area, which significantly reduces the chance the bracket can rip off.
Online
$68.00 for EA
Retail $76.54
Mfr PN: JK4424
Stock: 1

TUBE ARMOR 48 INCH TUBE ARMOR 48 INCH
Online
$41.60 for EA
Retail $44.75
Mfr PN: GU4021
Stock: 1
Want to beef up a section of tubing, whether it's lower links, tie rod, sliders or a section of cage, without adding a lot of weight? Artec Tube Armor is the answer. A 30 inch section only adds about 2 lbs to your tube. Contrast that to using a full length of thicker tube and you not only save weight but money since thicker tubing is significantly higher. Plus it generally means easier packaging than thicker tube since you don't have to worry about the added girth. This tube reinforcement is a great way to add protection exactly where it's needed.
Online
$41.60 for EA
Retail $44.75
Mfr PN: GU4021
Stock: 1

D60 KNUCKLE BOLT KIT D60 KNUCKLE BOLT KIT
Online
$44.82 for EA
Retail $49.19
Mfr PN: HS6080
Stock: 1
This Knuckle Bolt Kit is designed to work specifically with Artec Ultimate Dana 60 High Steer Arms to both strengthen the entire knuckle and steering as well as provide options for mounting your steering. Whether you just need to re-enforce your knuckle or want to run your tie rod in double sheer, this kit is designed with to fit multiple different steering configurations. The Knuckle Bolt Kit includes one 3/4" grade 8 bolt, one 3/4" all- steel mechanical locking nut, and one 1.25" outer diameter, .250" wall sleeve . Two kits will need to be purchased for a pair of high steer arms. This kit will require cutting the sleeve in half to run heim in double sheer. Factory knuckle hole will need to be drilled to 3/4 hole. Knuckle and high steer arm are SOLD SEPARATELY. Image is for illustrative purposes only.
Online
$44.82 for EA
Retail $49.19
Mfr PN: HS6080
Stock: 1

INNER FRAME BRKT 25 DEG INNER FRAME BRKT 25 DEG
Online
$53.48 for EA
Retail $85.74
Mfr PN: BR1018
Stock: 1
With Artec Industries brackets, we want to introduce a better looking product that has that custom one-off look and solve some of the issues that have plagued some of the generic brackets on the market, thus making them function better. Some common features that you'll see among our new brackets are: better access to grease fittings, bottom protection of the joint on lower link brackets, designs that make the bracket look like it was designed to be there from the beginning rather than just a piece of metal slapped on later, etc. Here are some of the highlights for this particular bracket that set it apart from all the others. 2.625" mounting width with 9/16" bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size for 1.25" rod ends with spacers. Made from 1/4" thick boxed steel plate for strength and impact resistance. Grease fitting access on top to allow easy maintenance of your most abused joint. Design allows joint to be mounted grease fitting up. Other companies' frame brackets mount the grease fitting down, resulting in a broken fitting on the very impact. Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint. Tapered sides allow bracket to be mounted at an angle on the frame without excess bracket hanging off the side. Not only does it look better and more natural to the frame, but it also means you have less bracket sliding on the rocks and getting in the way. The style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.
Online
$53.48 for EA
Retail $85.74
Mfr PN: BR1018
Stock: 1

PREMIUM 3PC TEFLON LINED PREMIUM 3PC TEFLON LINED
Online
$35.57 for EA
Retail $39.03
Mfr PN: JMX14L
Stock: 1
Online
$35.57 for EA
Retail $39.03
Mfr PN: JMX14L
Stock: 1

TRACK BAR BRACKET TRACK BAR BRACKET
Online
$68.00 for EA
Retail $76.54
Mfr PN: TJ2016
Stock: 1
Online
$68.00 for EA
Retail $76.54
Mfr PN: TJ2016
Stock: 1

3/4 INCH ROD END KIT 3/4 INCH ROD END KIT
Online
$55.73 for EA
Retail $59.95
Mfr PN: RE1201L
Stock: 1
Great for the builder on a budget. These rod ends from Midwest Control Products Corp are a great way to add strength, reliability, and flexibility to any situation that requires use of a rod end such as in suspension or steering applications. The -12 series utilizes a high strength Chromoly body with a polished chrome finish sure to impress. The ball is made from heat treated bearing steel for strength and hard chrome polished for a smooth surface. The race is injection molded nylon which keeps the joint quiet and tight for years and years of usability.
Online
$55.73 for EA
Retail $59.95
Mfr PN: RE1201L
Stock: 1

3/4 INCH ROD END KIT 3/4 INCH ROD END KIT
Online
$55.73 for EA
Retail $59.95
Mfr PN: RE1201R
Stock: 1
Great for the builder on a budget. These rod ends from Midwest Control Products Corp are a great way to add strength, reliability, and flexibility to any situation that requires use of a rod end such as in suspension or steering applications. The -12 series utilizes a high strength Chromoly body with a polished chrome finish sure to impress. The ball is made from heat treated bearing steel for strength and hard chrome polished for a smooth surface. The race is injection molded nylon which keeps the joint quiet and tight for years and years of usability.
Online
$55.73 for EA
Retail $59.95
Mfr PN: RE1201R
Stock: 1

3/4 HIGH MIS. SPACERS 3/4 HIGH MIS. SPACERS
Online
$17.81 for EA
Retail $19.16
Mfr PN: SP1202
Stock: 1
3/4 HIGH MIS. SPACERS
Online
$17.81 for EA
Retail $19.16
Mfr PN: SP1202
Stock: 1

OUTBACK '96-98 FORESTER 1999 OUTBACK '96-98 FORESTER 1999
Online
$49.32 for Each
Retail $88.20
Mfr PN: 43900
Stock: 0
Online
$49.32 for Each
Retail $88.20
Mfr PN: 43900
Stock: 0

3/4 INCH ROD END KIT 3/4 INCH ROD END KIT
Online
$53.50 for EA
Retail $59.95
Mfr PN: RE1203L
Stock: 0
3/4 INCH ROD END KIT
Online
$53.50 for EA
Retail $59.95
Mfr PN: RE1203L
Stock: 0

3/4 HIGH MIS. SPACERS 3/4 HIGH MIS. SPACERS
Online
$17.81 for EA
Retail $19.16
Mfr PN: SP1201
Stock: 0
3/4 HIGH MIS. SPACERS
Online
$17.81 for EA
Retail $19.16
Mfr PN: SP1201
Stock: 0