Items 1- 32 of 326 total

3 Inch Front Double Tube Bumper with Hoop in Textured Black Powder Coat 3 Inch Front Double Tube Bumper with Hoop in Textured Black Powder Coat
Online
$209.99 for EA
Retail $209.99
Mfr PN: JB48-FT
Stock: 22
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. The rear bumper even includes an added tow hitch receiver with a 2000 lb towing weight. Choose your Jeep bumpers with a polished or triple chrome-plated finish. Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Front Bumper With Hoop Black Texture No Drill Installation 5-year limited warranty
Online
$209.99 for EA
Retail $209.99
Mfr PN: JB48-FT
Stock: 22

3 Inch Front Tube Bumper with Hoop in Black Powder Coat 3 Inch Front Tube Bumper with Hoop in Black Powder Coat
Online
$209.99 for EA
Retail $209.99
Mfr PN: JB48-F
Stock: 4
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Front Bumper With Hoop Gloss Black No Drill Installation 2 Center Light Tabs Included 5-year limited warranty
Online
$209.99 for EA
Retail $209.99
Mfr PN: JB48-F
Stock: 4

3 Inch Front Tube Bumper with Hoop in Black Powder Coat 3 Inch Front Tube Bumper with Hoop in Black Powder Coat
Online
$199.99 for EA
Retail $199.99
Mfr PN: JB44-F
Stock: 52
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. Fits 1976 to 2006 Wrangler and CJ Front Bumper With Hoop Black No Drill Installation 5-year limited warranty
Online
$199.99 for EA
Retail $199.99
Mfr PN: JB44-F
Stock: 52

3 Inch Front Tube Bumper with Hoop in Stainless Steel 3 Inch Front Tube Bumper with Hoop in Stainless Steel
Online
$329.99 for EA
Mfr PN: JB48-FS
Stock: 15
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Front Bumper With Hoop Stainless Steel No Drill Installation 5-year limited warranty
Online
$329.99 for EA
Mfr PN: JB48-FS
Stock: 15

3 Inch Front Tube Bumper with Hoop inTextured Black Powder Coat 3 Inch Front Tube Bumper with Hoop inTextured Black Powder Coat
Online
$199.99 for EA
Retail $199.99
Mfr PN: JB44-FT
Stock: 84
Smittybilt Tubular Jeep Bumpers are custom crafted to fit your Jeep. They gain their strength from durable stainless steel and a 1-piece design, plus boast pre-cut vertical uprights for a little flair. And, these bumpers are robotically welded for extreme durability on the road or off. Plus, Smittybilt Tubular Jeep Bumpers are available for the front and rear. Fits 1976 to 2006 Wrangler and CJ Front Bumper With Hoop Black Texture No Drill Installation 5-year limited warranty
Online
$199.99 for EA
Retail $199.99
Mfr PN: JB44-FT
Stock: 84

3 Inch Tube Bumper End Caps, Black 3 Inch Tube Bumper End Caps, Black
Online
$8.99 for EA
Retail $8.99
Mfr PN: TA25
Stock: 224
In case of accidents or misfortune, these end caps are available for many of Smittybilt's tubular products. They come in black or chrome to match your bumper's finish. Black Sold as a pair Works with Smittybilt's 3 inch tube bumpers Direct fit replacement
Online
$8.99 for EA
Retail $8.99
Mfr PN: TA25
Stock: 224

3 Inch Tube Bumper End Caps, Chrome 3 Inch Tube Bumper End Caps, Chrome
Online
$12.99 for EA
Retail $12.99
Mfr PN: TA25-C
Stock: 28
In case of accidents or misfortune, these end caps are available for many of Smittybilt's tubular products. They come in black or chrome to match your bumper's finish. Chrome Sold as a pair Works with Smittybilt's 3 inch tube bumpers Direct fit replacement
Online
$12.99 for EA
Retail $12.99
Mfr PN: TA25-C
Stock: 28

3-inch Plastic Tube Bumper End Cap 3-inch Plastic Tube Bumper End Cap
Online
$5.33 for EA
Mfr PN: 11525.01
Stock: 1
These 3-inch round black plastic Tubular Bumper End Caps from Rugged Ridge will replace your missing caps. Sold individually
Online
$5.33 for EA
Mfr PN: 11525.01
Stock: 1

3-Inch Tube Bumper Light Mounting Bracket 3-Inch Tube Bumper Light Mounting Bracket
Online
$27.12 for EA
Mfr PN: 11503.81
Stock: 1
This versatile bracket lets you mount a light anywhere you want on your tubular bumper. It is black powder coated for maximum protection against the elements. Fits 1976 to 2014 Wrangler and CJ Black Light mounting bracket Fits tubular bumpers
Online
$27.12 for EA
Mfr PN: 11503.81
Stock: 1

3211050 BB LC80 3211050 BB LC80
Online
$904.81 for EA
Mfr PN: 3211050
Stock: 4
The Deluxe Bull Bars are standard non-winch bumpers. This bull bar completely replaces the original front bumper with a protective steel bumper designed specifically for each application.
Online
$904.81 for EA
Mfr PN: 3211050
Stock: 4

3413050 ARB BULL BARS 3413050 ARB BULL BARS
Online
$1298.83 for EA
Retail $1366.99
Mfr PN: 3413050
Stock: 12
Unlike most brush guards and bumpers, ARB Bull Bars incorporate a fully engineered mounting system which completely replaces the factory bumper. ARB's Deluxe Bull Bar selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.
Online
$1298.83 for EA
Retail $1366.99
Mfr PN: 3413050
Stock: 12

3438110 WB XTERRA 00-04 3438110 WB XTERRA 00-04
Online
$1007.00 for EA
Retail $1399.46
Mfr PN: 3438110
Stock: 0
Unlike most brush guards and bumpers, ARB Bull Bars incorporate a fully engineered mounting system which completely replaces the factory bumper. ARB's Deluxe Bull Bar selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.
Online
$1007.00 for EA
Retail $1399.46
Mfr PN: 3438110
Stock: 0

3450060 WB JEEP ZJ 93-98 3450060 WB JEEP ZJ 93-98
Online
$1074.84 for EA
Retail $1108.99
Mfr PN: 3450060
Stock: 3
What's a Bull Bar? Only the toughest bumper known to man! These bumpers offer unmatched quality, protection, strength and style and weigh in the 90-100 pound neighborhood. Features: Bull Bars are manufactured with today's latest technology: computer designing, laser-cut components, mandrel bending and clean quality welds. Mounting systems are engineered to each specific vehicle rather than the more commonly found universal approach. This ensures for uncompromised vehicle protection as well as proper strength for winching. Like everything else ARB does, the powder coating process is top notch. Although ARB Bull Bumpers were designed for WARN winches, an integrated winch mount with all the necessary hardware is standard on every bumper and will accept other winches. Other features include mounting points for off-road lights and clevis/d-rings, amber driving lights and 1-7/8" diameter tubing for fender and Grille protection. *This bumper is shipped via truck shipment.
Online
$1074.84 for EA
Retail $1108.99
Mfr PN: 3450060
Stock: 3

54 Inch Front Stainless Steel Bumper without Holes 54 Inch Front Stainless Steel Bumper without Holes
Online
$189.58 for EA
Retail $265.86
Mfr PN: 30430
Stock: 0
This bumper has mounting holes for license plate predrilled. To mount this bumper onto rear, bracket part #30508 for CJ's is required. Made of 304 grade stainless steel. Why buy Kentrol Stainless Steel? Because it's the best! Not all Stainless Steel products are created equal. Kentrol products are constructed of virgin metal, 304 Surgical, Stainless Steel. This stuff just won't rust! It's easy to care for too - an occasional waxing will keep the mirror-like shine looking brand new. And to top it off - all Kentrol products come complete with Stainless Steel hardware. Fits 1945 to 1986 CJ Stainless steel Includes stainless hardware 4" x 2" diameter Mounting holes for license plate predrilled
Online
$189.58 for EA
Retail $265.86
Mfr PN: 30430
Stock: 0

57in Rock Rear Bumper w/Hi 57in Rock Rear Bumper w/Hi
Online
$333.58 for EA
Retail $377.99
Mfr PN: 553-124
Stock: 2
Unique gull wing design increases tire clearance. Engineered for serious off road adventures, built to take a beating and protect your Jeep’s body and frame. Olympic’s energy absorption design deflects the pressure of impact from the bumper to the vehicle frame. Manufactured from 3/16 inch steel plate. Welded ends for extra strength. The 2” receiver on the bumper is an excellent multi-purpose feature, simple insert a recovery strap in the receiver and secure strap in place with a clevis pin. With a hitch it’s perfect for placing or removing a boat from its trailer when landing or docking. The Rock Bumper has an easy bolt on installation, simply remove and save existing hardware, position Rock Bumper and fasten with original hardware.
Online
$333.58 for EA
Retail $377.99
Mfr PN: 553-124
Stock: 2

ALUM FRT BMPR OVRDR ALUM FRT BMPR OVRDR
Online
$163.22 for EA
Retail $189.99
Mfr PN: 11541.14
Stock: 0
This over-rider hoop from Rugged Ridge simply bolts to the XHD aluminum front bumpers on 07-13 Jeep Wrangler. Black powdercoat finish.
Online
$163.22 for EA
Retail $189.99
Mfr PN: 11541.14
Stock: 0

ARB BULL BARS ARB BULL BARS
Online
$2196.18 for EA
Retail $2415.99
Mfr PN: 3415150
Stock: 0
Unlike most brush guards and bumpers, ARB Bull Bars incorporate a fully engineered mounting system which completely replaces the factory bumper. ARB's Deluxe Bull Bar selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same degree of vehicle integration, protection or functionality.
Online
$2196.18 for EA
Retail $2415.99
Mfr PN: 3415150
Stock: 0

BARREL STYLE HANDLE BARREL STYLE HANDLE
Online
$33.26 for EA
Mfr PN: 76856-09
Stock: 32
BARREL STYLE HANDLE
Online
$33.26 for EA
Mfr PN: 76856-09
Stock: 32

BFH BUMPER BFH BUMPER
Online
$537.58 for EA
Mfr PN: 11-16-020-DC
Stock: 3
Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Comp Stinger for the BFH front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle.
Online
$537.58 for EA
Mfr PN: 11-16-020-DC
Stock: 3

BFH BUMPER BFH BUMPER
Online
$511.18 for EA
Mfr PN: 11-16-020-DS
Stock: 2
Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Trail Stinger is similar in proportion to the famous Poison Spyder Trail Stinger. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle.
Online
$511.18 for EA
Mfr PN: 11-16-020-DS
Stock: 2

BFH BUMPER W/BRAWLER BAR BFH BUMPER W/BRAWLER BAR
Online
$451.18 for EA
Mfr PN: 11-16-020-B
Stock: 0
Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks great! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper.
Online
$451.18 for EA
Mfr PN: 11-16-020-B
Stock: 0

BFH BUMPER W/COMP STINGER BFH BUMPER W/COMP STINGER
Online
$501.32 for EA
Mfr PN: 17-16-020-C
Stock: 0
Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Comp Stinger for the BFH front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper.
Online
$501.32 for EA
Mfr PN: 17-16-020-C
Stock: 0

BFH BUMPER W/SHACKLE TABS BFH BUMPER W/SHACKLE TABS
Online
$383.98 for EA
Mfr PN: 11-16-020-D
Stock: 3
Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle.
Online
$383.98 for EA
Mfr PN: 11-16-020-D
Stock: 3

BFH BUMPER W/SHACKLE TABS BFH BUMPER W/SHACKLE TABS
Online
$383.98 for EA
Mfr PN: 17-16-020-D
Stock: 5
Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle.
Online
$383.98 for EA
Mfr PN: 17-16-020-D
Stock: 5

BFH BUMPER W/SHACKLE TABS BFH BUMPER W/SHACKLE TABS
Online
$383.98 for EA
Mfr PN: 13-16-020-D
Stock: 6
Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle.
Online
$383.98 for EA
Mfr PN: 13-16-020-D
Stock: 6

BFH Front Bumper with Brawler Bar and Shackle Tabs in Bare Steel BFH Front Bumper with Brawler Bar and Shackle Tabs in Bare Steel
Online
$511.18 for EA
Mfr PN: 14-16-020-DB
Stock: 62
Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited Bare steel 3/16" plate steel No wider than the frame rails Brawler Bar extends 7.4" forward from the front edge of the bumper 9.8" high from the top surface of the bumper Shackle tabs are 1" thick plate steel
Online
$511.18 for EA
Mfr PN: 14-16-020-DB
Stock: 62

BFH Front Bumper with Brawler Bar in Bare Steel BFH Front Bumper with Brawler Bar in Bare Steel
Online
$475.98 for EA
Mfr PN: 13-16-020-B
Stock: 0
Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks great! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper. Fits 1987 to 1995 YJ Wrangler Bare steel 3/16" plate steel No wider than frame rails Brawler Bar extends 7.4" forward from the front edge of the bumper 9.8" high from the top surface of the bumper This bumper does not include shackle tabs
Online
$475.98 for EA
Mfr PN: 13-16-020-B
Stock: 0

BFH Front Bumper with Shackle Tabs and Brawler Bar in Bare Steel BFH Front Bumper with Shackle Tabs and Brawler Bar in Bare Steel
Online
$511.18 for EA
Mfr PN: 11-16-020-DB
Stock: 16
Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks great! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle.
Online
$511.18 for EA
Mfr PN: 11-16-020-DB
Stock: 16

BFH Front Bumper with Shackle Tabs and Brawler Bar in Bare Steel BFH Front Bumper with Shackle Tabs and Brawler Bar in Bare Steel
Online
$511.18 for EA
Mfr PN: 17-16-020-DB
Stock: 3
Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Bare steel 3/16" plate steel Features an integrated Winch mount Brawler Bar extends 7.4" forward from the front edge of the bumper 9.8" high from the top surface of the bumper Shackle tabs are 1/" thick plate steel
Online
$511.18 for EA
Mfr PN: 17-16-020-DB
Stock: 3

BFH Front Bumper with Shackle Tabs and Comp Stinger in Bare Steel BFH Front Bumper with Shackle Tabs and Comp Stinger in Bare Steel
Online
$537.58 for EA
Mfr PN: 14-16-020-DC
Stock: 7
Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Comp Stinger for the BFH front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle.
Online
$537.58 for EA
Mfr PN: 14-16-020-DC
Stock: 7

BFH Front Bumper with Shackle Tabs and Comp Stinger in Bare Steel BFH Front Bumper with Shackle Tabs and Comp Stinger in Bare Steel
Online
$537.58 for EA
Mfr PN: 17-16-020-DC
Stock: 1
Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Comp Stinger for the BFH front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Fits 2007 to 2014 JK Wrangler, Rubicon and Unlimited 2 and 4-door models Bare steel 3/16" plate steel Features an integrated Winch mount Stinger provides even better forward-roll prevention Extends 17.6" forward from the front edge of the bumper 21.9" high from the top surface of the bumper Shackle tabs are 1" thick plate steel
Online
$537.58 for EA
Mfr PN: 17-16-020-DC
Stock: 1

BFH Front Bumper with Shackle Tabs and Trail Stinger in Bare Steel BFH Front Bumper with Shackle Tabs and Trail Stinger in Bare Steel
Online
$511.18 for EA
Mfr PN: 14-16-020-DS
Stock: 38
Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Trail Stinger is similar in proportion to the famous Poison Spyder Trail Stinger. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited Bare steel 3/16" plate steel No wider than frame rails Stinger extends 13.4" forward from the front edge of the bumper 17" high from the top surface of the bumper Shackle tabs are 1" thick plate steel
Online
$511.18 for EA
Mfr PN: 14-16-020-DS
Stock: 38