JK Brawler Rockers in Aluminum JK Brawler Rockers in Aluminum
Online
$999.99 for EA
Retail $1268.97
Mfr PN: 18-08-200-ALUM
Stock: 6
Due to popular demand, Poison Spyder Brawler Rockers for JK are now available in light-weight aluminum. Features and construction are exactly identical to our Heavy Duty STEEL Brawler Rockers, the only exception being that these are fabricated from 3/16" thick aluminum plate rather than 3/16" steel. Aluminum would be preferred by those who want the bad-ass looks, entry step functionality, and an admittedly reduced measure of rocker armor protection, but with a very significant weight savings compared to the steel versions. For those who will be testing their Jeeps on tougher trails where frequent contact with the rocks is to be expected, we highly recommend opting for the steel versions. While the aluminum is a respectable 3/16" thick, it should not be expected to withstand the same amount of punishment that our steel Brawler Rockers can handle. Brawler Rockers are two-piece "mini-boatside" style rocker armor. Each component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16" plate. The upper piece fits the lower section of your Jeep's exterior sheet metal like a glove, conforming to the subtle curvature of the JK and providing protection similar to Poison Spyder's JK Body Armor. The lower piece incorporates a rub rail/step that protrudes about 3Ľ" outboard of the Jeep's body tub. The top surface of the rub rail may also serve as an entry step. Below, the brake-formed 3/16" plate material angles down and inward to form a high clearance boatside. Inside, an array of beefy 3/16" thick internal gussets provide extra strength to the Brawler Rocker. Oval lightning holes along the length of the boatside section provide great Poison Spyder looks while allowing access to hose out mud and debris after a day on the trail. The ends of the Brawler Rockers are capped in the same 3/16" plate material, in angled facets that allow up to a 40" tire and visually integrate with the lines of Poison Spyder front and rear JK Crusher Flares. The upper piece attaches to the body tube using supplied stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece also with stainless steel flat-head cap screws and easy-to-install clip-nuts. All fastener holes are countersunk for a flat surface using the flat-head hardware. Underneath, the lower piece attaches at the Jeep's body mounts. Attaching the Brawler Rockers in this way, along several different planes, provides triangulated strength to the entire assembly. The body-mount tie-ins ensure that they are securely integrated to the strongest structural component of the Jeep—the frame—while also allowing the Brawler Rocker to hug the body tub as closely as possible. Please note that Brawler Rockers are NOT compatible with body lifts. Brawler Rockers ship bare, allowing you to paint or powdercoat in the color of your choice. Note that if you have previously installed Poison Spyder's JK Body Armor, you will be able to re-use the existing nut-serts, saving a significant amount of installation time (Body Armor will have to be removed).
Online
$999.99 for EA
Retail $1268.97
Mfr PN: 18-08-200-ALUM
Stock: 6

JEEP JK LIMB RISER JEEP JK LIMB RISER
Online
$168.00 for EA
Retail $198.28
Mfr PN: JK1061-1
Stock: 0
The Fab Fours Limb Riser focuses on Functionality, Protection and Style. Engineered to be the industries best and most stylish Limb Risers. Key features include ease of installation; 3/16 Steel Construction; and aggressive design. Enjoy the fit and finish of a quality set of Limb Risers from Fab Fours! Always Made in the USA!!
Online
$168.00 for EA
Retail $198.28
Mfr PN: JK1061-1
Stock: 0

TJ Rocker Knockers with Sliders TJ Rocker Knockers with Sliders
Online
$440.37 for EA
Retail $496.33
Mfr PN: 14-08-060
Stock: 31
Poison Spyder Rocker Knockers are the ultimate protection for your Jeep's vulnerable rocker panel area. As the trails get tougher and recreational off-roading gets more and more hardcore, vehicle body damage becomes more prevalent. And rocker panels are most vulnerable, taking hits from both underneath and the sides as you work your way through tight obstacles. Poison Spyder Rocker Knockers protect your rocker panels by cladding them in rugged, high strength 3/16" plate steel armor. Rocker Knockers are manufactured to hug the lines of your Jeep's rocker panels perfectly, forming a glove-fit with virtually no loss of valuable ground clearance. Specifically engineered for most Jeep CJ, YJ, TJ and LJ models, Rocker Knockers are CNC laser cut from high strength 3/16" plate steel, and precision brake-formed for a perfect fit. Bolt holes are countersunk for the included stainless steel flat head hardware, which yields a flat, unobstructed surface to slide over obstacles. All mounting hardware is included as well as detailed installation instructions. Poison Spyder Rocker Knockers bolt to your Jeep's body in key areas, and interface with strengthened areas of the underside of the tub such as body mounts, strengthening ribs, etc. Because they mount to the body itself, there is no resulting gap or misalignment when a body lift is installed. For added side protection on the trail, these Rocker Knockers come with a tubular Slider. The Slider is crafted of high strength DOM structural tubing, welded to the Rocker Knocker with additional DOM tube spacers. The result is a combination of rocker panel protection and a tubular slider to keep your rig's body sides a few precious inches away from taller rocks and trees. The Slider may also become an integral part of your driving strategy, as it may be useful to pivot the vehicle around obstacles while searching for traction. It also serves as a short entry step, assisting entry and egress. For installations in which you would like to protect the paint underneath the Rocker Knocker, as well as provide a measure of vibration absorption, we offer Rubber Rocker Liners, precisely cut to fit between the Rocker Knocker and the Jeep's body. Be sure to order these separately, as they're not included in the standard Rocker Knocker package.
Online
$440.37 for EA
Retail $496.33
Mfr PN: 14-08-060
Stock: 31

Rock Crawler Side Armor Rock Crawler Side Armor
Online
$360.99 for EA
Retail $386.09
Mfr PN: 76634
Stock: 407
The SRC Side Armor for the JK's utilize a one piece design and is manufactured from 1.75" .120 wall tubing. Each SRC Side Armor utilizes a dual girder system provides the ultimate protection for the sides and under section of your Wrangler. SRC Side Armor can be utilize as protection as well as a step at the same time. Every SRC Side Armor bolts up to your vehicle without any drilling or modifications, giving you the ultimate protection from wheel to wheel. All SRC Side Armors come finished in our signature series Matte Black Textured Powder Coat.
Online
$360.99 for EA
Retail $386.09
Mfr PN: 76634
Stock: 407

Smittybilt XRC BODY CLADDING JK 4DOOR 76887 Smittybilt XRC BODY CLADDING JK 4DOOR 76887
Online
$214.99 for EA
Retail $230.99
Mfr PN: 76887
Stock: 77
The ultimate in body side protection, Smittybilts Body Cladding is manufactured from 1/8" cold rolled steel and is engineered to fit and follow body contour to exacting specifications. The body cladding will work with O.E. and aftermarket flares to give lower quarter panel protection. 304 Marine grade stainless steel button head hardware included. Two stage textured matte black powder coat finish comes with a 5 Year Limited Finish Warranty. Body Cladding comes with Smittybilts Advantage Limited Lifetime Warranty. JK 4DOOR Fits 2007 to 2016 Wrangler Unlimited and Rubicon Unlimited;4-door models;Manufactured from 1/8” cold rolled steel;Engineered to fit and follow body contour to exacting specifications;Complete lower quarter panel protection when use with XRC Rock Sliders;Engineered to work with O.E. and aftermarket flares as well as the XRC body armor;304 marine grade stainless steel button head hardware;Two Stage Textured Matte Black Finish Powder Coat Finish - 5 year Limited Warranty
Online
$214.99 for EA
Retail $230.99
Mfr PN: 76887
Stock: 77

XRC Rock Sliders XRC Rock Sliders
Online
$277.99 for EA
Retail $412.62
Mfr PN: 76868
Stock: 53
Manufactured from 3/16" solid plate and designed to form to the vehicle and protect your ride from the elements. Features a 1.75" over rider tube that provides extra protection. Finished in a Two Stage Matte Black Powder Coat. 5 Year Limited Warranty. Drilling is required in this application.
Online
$277.99 for EA
Retail $412.62
Mfr PN: 76868
Stock: 53

Rock Crawler Side Armor Rock Crawler Side Armor
Online
$341.00 for EA
Retail $362.99
Mfr PN: 76633
Stock: 46
The ultimate vehicle protection! Constructed of heavy duty 2 E-Coated powder coat steel tube, these tough Side Armor / Rocker Guard units are built to take on the roughest terrain! With two hot styles to choose from, you can customize your Jeep to fit your needs! Fits 2007 to 2014 JK Wrangler and Rubicon 2-door models Textured black powder coat Heavy-duty 2" steel tube
Online
$341.00 for EA
Retail $362.99
Mfr PN: 76633
Stock: 46

JK Rocker Knockers with Sliders JK Rocker Knockers with Sliders
Online
$737.88 for EA
Retail $831.64
Mfr PN: 18-08-020
Stock: 33
The most vulnerable areas on the body of the Jeep JK are the rocker panels. Poison Spyder Rocker Knockers protect your JK's rocker panel area while enabling you to slide over rocks and obstacles. Rocker Knockers enhance your Jeep's trail performance while adding rugged off-road looks to your JK. Poison Spyder JK Rocker Knockers are engineered for brute strength and impact resistance by attaching to the Jeep's body in 14 strategic bolt locations. The mounting plate is CNC laser cut from 3/16" plate steel and precision brake-formed for a perfect fit. The tubular rocker rail is rugged 1.75" X .120 wall DOM structural tubing. The slider rail is fabricated from CNC-bent 1.5" X .120 wall DOM tubing. The space between the Slider and the main tube of the Rocker Knocker is filled with a CNC laser-cut Slider Skid. The Skid features Poison Spyder's exclusive oval dimples for structural strength as well as great Poison Spyder looks. The Skid attaches with countersunk stainless steel flat head cap screws for a flush surface. The Slider and Skid mount at an angle to the main tube of the Rocker Knocker to provide boatside-like protection from the rocks while keeping the Jeep's doors and body a safe distance from higher level trail hazards. Another quality element of the Poison Spyder Rocker Knocker is the ability to remove the outer slider skid. The outer skid is built from 1/8" steel and is secured to a 3/16" base plate welded into the slider hoop assembly. The Slider does not rely on the skid for structure. The advantage of having the ability to remove the skid, is to allow you to replace it if it becomes damaged to a level that it has lost its aesthetic appearance or functionality. Also you will be able to customize the Sliders to match your Jeep, and to easily be able to remove it for re-finish. Poison Spyder JK Rocker Knockers are compatible with all known suspensions and body lifts, including long arm kits. Because the Rocker Knockers mount directly to the Jeep's body tub, they will lift with the body when a body lift is installed (competitors' frame-mounted rocker guards may leave a gap on body-lifted vehicles). As an added attribute the Rocker Knocker mounting plate is designed with drain reliefs to discourage debris from collecting in the lower body cavity. Poison Spyder JK Rocker Knockers can be utilized as a stand alone component or can be used in conjunction with Poison Spyder's JK Body Armor. JK Body Armor is a secondary line of defense against off road damage to your Jeep, protecting the Jeep by reaching above the Slider level up to the door line. Rocker Knockers do not mount or use the Body Armor for additional structure.
Online
$737.88 for EA
Retail $831.64
Mfr PN: 18-08-020
Stock: 33

76870 XRC Textured Black Rock Slider Rocker Guards 76870 XRC Textured Black Rock Slider Rocker Guards
Online
$5.83 for EA
Retail $5.99
Mfr PN: 76870HDW
Stock: 28
HARDWARE KIT
Online
$5.83 for EA
Retail $5.99
Mfr PN: 76870HDW
Stock: 28

Poison Spyder Customs 07-16 Jeep Wrangler JK 4-Door Ricochet Rockers Frame Mount 18-08-040 Poison Spyder Customs 07-16 Jeep Wrangler JK 4-Door Ricochet Rockers Frame Mount 18-08-040
Online
$675.41 for EA
Retail $726.11
Mfr PN: 18-08-040
Stock: 15
Poison Spyder JK Ricochet Rockers™ provide rocker protection for the Jeep JK’s vulnerable body sheet metal, while also providing a convenient step for easily entering and exiting the Jeep. JK Ricochet Rockers™ are rigidly mounted directly to the Jeep’s frame to provide the best protection possible without relying on the Jeep’s comparatively weaker body tub for support. DOM tubing sliders keep the sides of the Jeep a safe distance away from the rocks, while the formed and dimpled metal plates act as both entry steps and strengthening gussets. Available for both 2-door and 4-door 2007 to present JK’s. Fits 2007 to 2016 JK Wrangler Unlimited and Rubicon Unlimited;4-door models;Dimpled step plate for easy entry;Frame-mounted for ultimate strength;Protects the Jeep’s rocker panels from damage on the trail;1.75” OD x .120” wall DOM main tube with 1.5” x .120” wall DOM slider tube
Online
$675.41 for EA
Retail $726.11
Mfr PN: 18-08-040
Stock: 15

Online
$17.70 for EA
Retail $17.59
Mfr PN: 76994-07
Stock: 13

JK Brawler Rockers in Bare Steel JK Brawler Rockers in Bare Steel
Online
$882.98 for EA
Retail $1095.62
Mfr PN: 18-08-200
Stock: 11
Jeep JK's, are extremely vulnerable to rocker armor damage on the trail. Poison Spyder Brawler Rockers provide the ultimate rocker armor protection while actually enhancing your Jeep's off-road capability—not to mention they look bad-ass! Brawler Rockers are two-piece "mini-boatside" style rocker armor. Each component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16" plate steel. The upper piece fits the lower section of your Jeep's exterior sheet metal like a glove, conforming to the subtle curvature of the JK and providing protection similar to Poison Spyder's JK Body Armor. The lower piece incorporates an extremely strong rub rail that protrudes about 3-1/4" outboard of the Jeep's body tub. The top surface of the rub rail may also serve as an entry step. Below, the brake-formed 3/16" plate steel angles down and inward to form a high clearance boatside for sliding off of rocks and obstacles. Inside, an array of beefy 3/16" thick internal gussets provide ultimate strength to the Brawler Rocker. Oval lightning holes along the length of the boatside section provide great Poison Spyder looks while allowing access to hose out mud and debris after a day on the trail. The ends of the Brawler Rockers are capped in the same 3/16" plate steel, in angled facets that allow up to a 40" tire and visually integrate with the lines of Poison Spyder front and rear JK Crusher Flares. The upper piece attaches to the body tube using supplied stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece also with stainless steel flat-head cap screws and easy-to-install clip-nuts. All fastener holes are countersunk for a flat surface using the flat-head hardware. Underneath, the lower piece attaches at the Jeep's body mounts. Attaching the Brawler Rockers in this way, along several different planes, provides triangulated strength to the entire assembly. The body-mount tie-ins ensure that they are securely integrated to the strongest structural component of the Jeep—the frame—while also allowing the Brawler Rocker to hug the body tub as closely as possible. Please note that Brawler Rockers are NOT compatible with body lifts. Brawler Rockers are designed to handle a serious beating! They not only provide unmatched rocker protection, but they also provide a super strong pivot point which can help you to maneuver through tight obstacles. The boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail. The protruding rub rail keeps vertical obstructions such as trees and rock walls a safe distance from the Jeep's doors and other vulnerable body parts. And when you need to change a tire or perform an extraction, the Brawler Rocker provides a strong, convenient lifting point for your Hi-Lift jack.
Online
$882.98 for EA
Retail $1095.62
Mfr PN: 18-08-200
Stock: 11

XRC Rock Sliders without Tube Step XRC Rock Sliders without Tube Step
Online
$232.99 for EA
Retail $249.69
Mfr PN: 76870
Stock: 11
Manufactured from 3/16” solid plate and designed to form to the vehicle and protect your ride from the elements. Features a 1.75” over rider tube that provides extra protection. Bolts up to factory holes and requires no drilling or modifications. Finished in a Two Stage Matte Black Powder Coat. 5 Year Limited Warranty.
Online
$232.99 for EA
Retail $249.69
Mfr PN: 76870
Stock: 11

Smittybilt Rocker Guard Panel Set Dvr SD 2/4 DR JK 2/4 Door 76994-08 Smittybilt Rocker Guard Panel Set Dvr SD 2/4 DR JK 2/4 Door 76994-08
Online
$17.70 for EA
Retail $17.59
Mfr PN: 76994-08
Stock: 7
Rocker Panel Guard Set; Driver Side;
Online
$17.70 for EA
Retail $17.59
Mfr PN: 76994-08
Stock: 7

XRC Rock Slider XRC Rock Slider
Online
$527.99 for EA
Retail $566.49
Mfr PN: 76853
Stock: 6
The All new line of Smittybilt XRC bumpers and armor available for the 1984-2001 Jeep Cherokee was engineered to provide maximum clearance for rock crawling. Each bumper has high degree approach angles & raised corners for maximum ground clearance. Manufactured out of 3/16" cold rolled steel that is robotically welded to exact specifications. Fits 1984 to 2001 XJ Cherokee Textured black
Online
$527.99 for EA
Retail $566.49
Mfr PN: 76853
Stock: 6

LJ Ricochet Rockers LJ Ricochet Rockers
Online
$479.98 for EA
Retail $574.99
Mfr PN: 15-50-050
Stock: 5
Poison Spyder Ricochet Rockers are built with the same hardcore toughness as its counterpart the Rocker Knocker, with the added utility of a combination 5" step and slider. This rocker protection is the pinnacle of hardcore body armor protection, style and convenience. The Ricochet Rocker is available for Jeep TJ, Unlimited, YJ, CJ7 and CJ8. Ricochet Rocker protection can be used alone or in combination with Crusher Corners. The two body armor pieces fit together at the rear flare area. Used together, Ricochet Rockers' and Crusher Corners form the ultimate protection, guarding your Jeep's body from the front wheel well to the tailgate. Ricochet Rockers are secured with counter sunk 3/8" stainless hardware, supplied in the kit with detailed installation instructions. Ricochet Rockers have a distinguishing 5" dimpled plate that acts as a step and a stout reinforcement for the slider. This makes the Ricochet Rocker protection a very effective armor addition and an effective pivot for getting into your rock chariot. Jeep TJ,YJ and CJ7 have three dimples, Unlimited and CJ8 have four. With the dimple protrusions pointing upward, they give the extra benefit of increased foot traction when entering or exiting the vehicle, even with boots covered with snow or mud Ricochet Rockers are further reinforced with additional bracing below the dimpled step. The dual tube support and slider bar is constructed of 1.5" DOM tubing, the step and corner gussets are CNC laser cut from 3/16" steel plate, and brake-formed to act as their own gusset for strength and a clean appearance. Everything is professionally welded and comes to you ready to paint and bolt on. For installations in which you would like to protect the paint underneath the Ricochet Rocker, as well as provide a measure of vibration absorption, we offer an optional Rubber Liner, precisely cut to fit between the Rocker Knocker and the Jeep's body. Be sure to order these separately, as they're not included in the standard Ricochet Rocker package.
Online
$479.98 for EA
Retail $574.99
Mfr PN: 15-50-050
Stock: 5

Poison Spyder Customs Brawler Rockers in Bare Steel 17-08-200 Poison Spyder Customs Brawler Rockers in Bare Steel 17-08-200
Online
$779.99 for EA
Retail $1029.61
Mfr PN: 17-08-200
Stock: 5
Jeep JK's, are extremely vulnerable to rocker armor damage on the trail. Poison Spyder Brawler Rockers provide the ultimate rocker armor protection while actually enhancing your Jeep's off-road capability—not to mention they look bad-ass! Brawler Rockers are two-piece "mini-boatside" style rocker armor. Each component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16" plate steel. The upper piece fits the lower section of your Jeep's exterior sheet metal like a glove, conforming to the subtle curvature of the JK and providing protection similar to Poison Spyder's JK Body Armor. The lower piece incorporates an extremely strong rub rail that protrudes about 3-1/4" outboard of the Jeep's body tub. The top surface of the rub rail may also serve as an entry step. Below, the brake-formed 3/16" plate steel angles down and inward to form a high clearance boatside for sliding off of rocks and obstacles. Inside, an array of beefy 3/16" thick internal gussets provide ultimate strength to the Brawler Rocker. Oval lightning holes along the length of the boatside section provide great Poison Spyder looks while allowing access to hose out mud and debris after a day on the trail. The ends of the Brawler Rockers are capped in the same 3/16" plate steel, in angled facets that allow up to a 40" tire and visually integrate with the lines of Poison Spyder front and rear JK Crusher Flares. The upper piece attaches to the body tube using supplied stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece also with stainless steel flat-head cap screws and easy-to-install clip-nuts. All fastener holes are countersunk for a flat surface using the flat-head hardware. Underneath, the lower piece attaches at the Jeep's body mounts. Attaching the Brawler Rockers in this way, along several different planes, provides triangulated strength to the entire assembly. The body-mount tie-ins ensure that they are securely integrated to the strongest structural component of the Jeep—the frame—while also allowing the Brawler Rocker to hug the body tub as closely as possible. Please note that Brawler Rockers are NOT compatible with body lifts. Brawler Rockers are designed to handle a serious beating! They not only provide unmatched rocker protection, but they also provide a super strong pivot point which can help you to maneuver through tight obstacles. The boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail. The protruding rub rail keeps vertical obstructions such as trees and rock walls a safe distance from the Jeep's doors and other vulnerable body parts. And when you need to change a tire or perform an extraction, the Brawler Rocker provides a strong, convenient lifting point for your Hi-Lift jack. Fits 2007 to 2014 JK Wrangler and Rubicon 2-door models Bare steel Two-piece "mini-boatside" style rocker armor 3/16" plate steel All fastener holes are countersunk Boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail Angled facets that allow up to a 40" tire
Online
$779.99 for EA
Retail $1029.61
Mfr PN: 17-08-200
Stock: 5

Poison Spyder Customs Brawler Rockers in Aluminum 17-08-200-ALUM Poison Spyder Customs Brawler Rockers in Aluminum 17-08-200-ALUM
Online
$1031.66 for EA
Retail $1161.61
Mfr PN: 17-08-200-ALUM
Stock: 5
Due to popular demand, Poison Spyder Brawler Rockers for JK are now available in light-weight aluminum. Features and construction are exactly identical to our Heavy Duty STEEL Brawler Rockers, the only exception being that these are fabricated from 3/16" thick aluminum plate rather than 3/16" steel. Aluminum would be preferred by those who want the bad-ass looks, entry step functionality, and an admittedly reduced measure of rocker armor protection, but with a very significant weight savings compared to the steel versions. For those who will be testing their Jeeps on tougher trails where frequent contact with the rocks is to be expected, we highly recommend opting for the steel versions. While the aluminum is a respectable 3/16" thick, it should not be expected to withstand the same amount of punishment that our steel Brawler Rockers can handle. Brawler Rockers are two-piece "mini-boatside" style rocker armor. Each component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16" plate. The upper piece fits the lower section of your Jeep's exterior sheet metal like a glove, conforming to the subtle curvature of the JK and providing protection similar to Poison Spyder's JK Body Armor. The lower piece incorporates a rub rail/step that protrudes about 3¼" outboard of the Jeep's body tub. The top surface of the rub rail may also serve as an entry step. Below, the brake-formed 3/16" plate material angles down and inward to form a high clearance boatside. Inside, an array of beefy 3/16" thick internal gussets provide extra strength to the Brawler Rocker. Oval lightning holes along the length of the boatside section provide great Poison Spyder looks while allowing access to hose out mud and debris after a day on the trail. The ends of the Brawler Rockers are capped in the same 3/16" plate material, in angled facets that allow up to a 40" tire and visually integrate with the lines of Poison Spyder front and rear JK Crusher Flares. The upper piece attaches to the body tube using supplied stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece also with stainless steel flat-head cap screws and easy-to-install clip-nuts. All fastener holes are countersunk for a flat surface using the flat-head hardware. Underneath, the lower piece attaches at the Jeep's body mounts. Attaching the Brawler Rockers in this way, along several different planes, provides triangulated strength to the entire assembly. The body-mount tie-ins ensure that they are securely integrated to the strongest structural component of the Jeep—the frame—while also allowing the Brawler Rocker to hug the body tub as closely as possible. Please note that Brawler Rockers are NOT compatible with body lifts. Brawler Rockers ship bare, allowing you to paint or powdercoat in the color of your choice. Note that if you have previously installed Poison Spyder's JK Body Armor, you will be able to re-use the existing nut-serts, saving a significant amount of installation time (Body Armor will have to be removed). Fits 2007 to 2016 Wrangler and Rubicon;2-door models;Aluminum;Two-piece "mini-boatside" style rocker armor;3/16" thick aluminum plate;All fastener holes are countersunk;Boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail;Angled facets that allow up to a 40" tire
Online
$1031.66 for EA
Retail $1161.61
Mfr PN: 17-08-200-ALUM
Stock: 5

Poison Spyder Customs Brawler Rockers in Black Powder Coat 17-08-200P1 Poison Spyder Customs Brawler Rockers in Black Powder Coat 17-08-200P1
Online
$979.60 for EA
Retail $1161.58
Mfr PN: 17-08-200P1
Stock: 5
Jeep JKs, are extremely vulnerable to rocker armor damage on the trail. Poison Spyder Brawler Rockers provide the ultimate rocker armor protection while actually enhancing your Jeeps off-road capability—not to mention they look bad-ass! Brawler Rockers are two-piece "mini-boatside" style rocker armor. Each component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16" plate steel. The upper piece fits the lower section of your Jeeps exterior sheet metal like a glove, conforming to the subtle curvature of the JK and providing protection similar to Poison Spyders JK Body Armor. The lower piece incorporates an extremely strong rub rail that protrudes about 3-1/4" outboard of the Jeeps body tub. The top surface of the rub rail may also serve as an entry step. Below, the brake-formed 3/16" plate steel angles down and inward to form a high clearance boatside for sliding off of rocks and obstacles. Inside, an array of beefy 3/16" thick internal gussets provide ultimate strength to the Brawler Rocker. Oval lightning holes along the length of the boatside section provide great Poison Spyder looks while allowing access to hose out mud and debris after a day on the trail. The ends of the Brawler Rockers are capped in the same 3/16" plate steel, in angled facets that allow up to a 40" tire and visually integrate with the lines of Poison Spyder front and rear JK Crusher Flares. The upper piece attaches to the body tube using supplied stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece also with stainless steel flat-head cap screws and easy-to-install clip-nuts. All fastener holes are countersunk for a flat surface using the flat-head hardware. Underneath, the lower piece attaches at the Jeeps body mounts. Attaching the Brawler Rockers in this way, along several different planes, provides triangulated strength to the entire assembly. The body-mount tie-ins ensure that they are securely integrated to the strongest structural component of the Jeep—the frame—while also allowing the Brawler Rocker to hug the body tub as closely as possible. Please note that Brawler Rockers are NOT compatible with body lifts. Brawler Rockers are designed to handle a serious beating! They not only provide unmatched rocker protection, but they also provide a super strong pivot point which can help you to maneuver through tight obstacles. The boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail. The protruding rub rail keeps vertical obstructions such as trees and rock walls a safe distance from the Jeeps doors and other vulnerable body parts. And when you need to change a tire or perform an extraction, the Brawler Rocker provides a strong, convenient lifting point for your Hi-Lift jack. BLACK POWDER COAT Fits 2007 to 2017 JK Wrangler and Rubicon;2-door models;Black powder coat;Two-piece "mini-boatside" style rocker armor;3/16" plate steel;All fastener holes are countersunk;Boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail;Angled facets that allow up to a 40" tire
Online
$979.60 for EA
Retail $1161.58
Mfr PN: 17-08-200P1
Stock: 5

Rock Crawler Rocker Guards Rock Crawler Rocker Guards
Online
$358.99 for EA
Retail $386.09
Mfr PN: 76644
Stock: 5
The ultimate vehicle protection! Constructed of heavy duty 2 E-Coated powder coat steel tube, these tough Side Armor / Rocker Guard units are built to take on the roughest terrain! With two hot styles to choose from, you can customize your Jeep to fit your needs!
Online
$358.99 for EA
Retail $386.09
Mfr PN: 76644
Stock: 5

Trail Armor Rocker Side Panels Trail Armor Rocker Side Panels
Online
$91.99 for EA
Retail $115.20
Mfr PN: 14002
Stock: 5
Your Jeep Wrangler is made for getting off the beaten path. So make it stand out from the crowd, with custom-built Trail Armor(R) from Bushwacker. Trail Armor(R) combines trail-proven toughness with state-of-the-art Dura-Flex(R) 2000 TPO material for a look all its own. Dura-Flex(R) 2000 TPO is our proprietary automotive protective material, ruggedized for extra durability and flexibility. Unlike steel, it can't rust. And, unlike lesser products, it's 100% UV protected to prevent chalking. We make everything right here in the USA, designing to the tightest tolerances for a factory-like fit. Yet, you install Trail Armor(R) in minutes with automotive-grade 3M (TM) adhesive, no drilling needed. Like all Bushwacker products, Trail Armor(R) is backed by our Limited Lifetime Warranty. Your Trail Armor(R) starts out looking tough, and lives up to its looks year after year.
Online
$91.99 for EA
Retail $115.20
Mfr PN: 14002
Stock: 5

Rock Rail Rock Rail
Online
$439.95 for EA
Retail $568.50
Mfr PN: J074RKR
Stock: 4
The N-FAB Rock Rails with optional Detachable Step (SOLD SEPARATELY) provide superior protection while enhancing the looks of your Jeep. Constructed from 1-3/4" .120 wall heavy duty tubular steel, the N-FAB Rock Rails feature a distinctive, fully-welded, double tube design that provides optimum strength and protection for your Jeep. Also available are the Detachable Steps (SOLD SEPARATELY) which are designed to be added to the N-FAB Rock Rail to improve access to your Jeep. These steps are sold in pairs and are a simple bolt on design.
Online
$439.95 for EA
Retail $568.50
Mfr PN: J074RKR
Stock: 4

XRC Rock Sliders XRC Rock Sliders
Online
$275.99 for EA
Retail $294.79
Mfr PN: 76861
Stock: 4
Manufactured from 3/16” solid plate and designed to form to the vehicle and protect your ride from the elements. Features a 1.75” over rider tube that provides extra protection. Drilling required. Finished in a Two Stage Matte Black Powder Coat. 5 Year Limited Warranty.
Online
$275.99 for EA
Retail $294.79
Mfr PN: 76861
Stock: 4

Poison Spyder Customs 76-86 CJ-7 Rocker Knocker Bare Metal 11-08-010 Poison Spyder Customs 76-86 CJ-7 Rocker Knocker Bare Metal 11-08-010
Online
$335.45 for EA
Retail $377.54
Mfr PN: 11-08-010
Stock: 4
Poison Spyder Rocker Knockers are the ultimate protection for your Jeep's vulnerable rocker panel area. As the trails get tougher and recreational off-roading gets more and more hardcore, vehicle body damage becomes more prevalent. And rocker panels are most vulnerable, taking hits from both underneath and the sides as you work your way through tight obstacles. Poison Spyder Rocker Knockers protect your rocker panels by cladding them in rugged, high strength 3/16" plate steel armor. Rocker Knockers are manufactured to hug the lines of your Jeep's rocker panels perfectly, forming a glove-fit with virtually no loss of valuable ground clearance. Specifically engineered for CJ7 models, Rocker Knockers are CNC laser cut from high strength 3/16" plate steel, and precision brake-formed for a perfect fit. Bolt holes are countersunk for the included stainless steel flat head hardware, which yields a flat, unobstructed surface to slide over obstacles. All mounting hardware is included as well as detailed installation instructions. Poison Spyder Rocker Knockers bolt to your Jeep's body in key areas, and interface with strengthened areas of the underside of the tub such as body mounts, strengthening ribs, etc. Because they mount to the body itself, there is no resulting gap or misalignment when a body lift is installed. For installations in which you would like to protect the paint underneath the Rocker Knocker, as well as provide a measure of vibration absorption, we offer Rubber Rocker Liners, precisely cut to fit between the Rocker Knocker and the Jeep's body. Be sure to order these separately, as they're not included in the standard Rocker Knocker package. Bare Metal Fits 1976 to 1986 CJ7;Bare steel;High strength 3/16" plate steel;Bolt holes are countersunk;Stainless steel flat head hardware;Mounts to the body itself - no resulting gap or misalignment when a body lift is installed
Online
$335.45 for EA
Retail $377.54
Mfr PN: 11-08-010
Stock: 4

XRC Rock Sliders XRC Rock Sliders
Online
$275.99 for EA
Retail $294.79
Mfr PN: 76865
Stock: 4
Manufactured from 3/16" solid plate and designed to form to the vehicle and protect your ride from the elements. Features a 1.75" over rider tube that provides extra protection. Bolts up to factory holes. Finished in a Two Stage Matte Black Powder Coat. Five-year limited warranty. Fits 1976 to 1986 CJ7 Matte black powder coat Manufactured from 3/16" solid plate Designed to form to the vehicle and protect your ride from the elements 5-year limited warranty
Online
$275.99 for EA
Retail $294.79
Mfr PN: 76865
Stock: 4

DIY Long Ricochet Rockers DIY Long Ricochet Rockers
Online
$328.56 for EA
Retail $369.62
Mfr PN: DIY-50-050
Stock: 4
The DIY Rico Step Kit from Poison Spyder allows the do-it-yourselfer to add a heavy duty rub rail and entry step to the stock Jeep JK Rubicon rocker rails or other aftermarket plate steel rocker armor. The components provided in the kit are similar to Poison Spyder's "Ricochet Rockers", hence the name of the kit. The kit includes DOM tube rub rails, Rico Steps and end gussets. The DOM tube pieces are CNC bent and pre-notched, ready to weld on. The Rico Steps and gussets are laser cut from 3/16 plate steel. The steps are brake-formed to provide extra strength and reverse-dimpled for foot traction. The main tubes in this kit measure 66.5" long and includes front and rear step plates, as it was designed specifically for the JK Unlimited (4-door), but might possibly be used on other vehicles if it fits. Requires welding.
Online
$328.56 for EA
Retail $369.62
Mfr PN: DIY-50-050
Stock: 4

XRC Rock Sliders without Tube Step XRC Rock Sliders without Tube Step
Online
$231.99 for EA
Retail $249.69
Mfr PN: 76860
Stock: 3
Manufactured from 3/16" solid plate and designed to form to the vehicle and protect your ride from the elements. Features a 1.75" over rider tube that provides extra protection. Finished in a Two Stage Matte Black Powder Coat. 5 Year Limited Warranty. Fits 1987 to 1995 YJ Wrangler Matte black powder coat Manufactured from 3/16" solid plate Designed to form to the vehicle and protect your ride from the elements Drilling may be required
Online
$231.99 for EA
Retail $249.69
Mfr PN: 76860
Stock: 3

YJ Rocker Knockers with Sliders YJ Rocker Knockers with Sliders
Online
$375.99 for EA
Retail $496.33
Mfr PN: 13-08-050
Stock: 3
Poison Spyder Rocker Knockers are the ultimate protection for your Jeep's vulnerable rocker panel area. As the trails get tougher and recreational off-roading gets more and more hardcore, vehicle body damage becomes more prevalent. And rocker panels are most vulnerable, taking hits from both underneath and the sides as you work your way through tight obstacles. Poison Spyder Rocker Knockers protect your rocker panels by cladding them in rugged, high strength 3/16" plate steel armor. Rocker Knockers are manufactured to hug the lines of your Jeep's rocker panels perfectly, forming a glove-fit with virtually no loss of valuable ground clearance. Specifically engineered for YJ models using TJ fender flares, Rocker Knockers are CNC laser cut from high strength 3/16" plate steel, and precision brake-formed for a perfect fit. Bolt holes are countersunk for the included stainless steel flat head hardware, which yields a flat, unobstructed surface to slide over obstacles. All mounting hardware is included as well as detailed installation instructions. Poison Spyder Rocker Knockers bolt to your Jeep's body in key areas, and interface with strengthened areas of the underside of the tub such as body mounts, strengthening ribs, etc. Because they mount to the body itself, there is no resulting gap or misalignment when a body lift is installed. For installations in which you would like to protect the paint underneath the Rocker Knocker, as well as provide a measure of vibration absorption, we offer Rubber Rocker Liners, precisely cut to fit between the Rocker Knocker and the Jeep's body. Be sure to order these separately, as they're not included in the standard Rocker Knocker package. For added side protection on the trail, these Rocker Knockers come with a tubular Slider. The Slider is crafted of high strength DOM structural tubing, welded to the Rocker Knocker with additional DOM tube spacers. The result is a combination of rocker panel protection and a tubular slider to keep your rig's body sides a few precious inches away from taller rocks and trees. The Slider may also become an integral part of your driving strategy, as it may be useful to pivot the vehicle around obstacles while searching for traction. It also serves as a short entry step, assisting entry and egress. For installations in which you would like to protect the paint underneath the Rocker Knocker, as well as provide a measure of vibration absorption, we offer Rubber Rocker Liners, precisely cut to fit between the Rocker Knocker and the Jeep's body. Be sure to order these separately, as they're not included in the standard Rocker Knocker package. Fits 1987 to 1995 YJ Wrangler Bare steel For use with TJ fender flares High strength 3/16" plate steel Bolt holes are countersunk Stainless steel flat head hardware Mounts to the body itself - no resulting gap or misalignment when a body lift is installed Slider is high strength DOM structural tubing, welded to the Rocker Knocker with additional DOM tube spacers
Online
$375.99 for EA
Retail $496.33
Mfr PN: 13-08-050
Stock: 3

82-86 CJ8 Slider Liner 82-86 CJ8 Slider Liner
Online
$62.50 for EA
Retail $73.90
Mfr PN: 12-08-310
Stock: 3
Precision cut rubber Rocker Liners fit between the Jeep body and the Poison Spyder Rocker Knockers or Ricochet Rockers to protect the paint and provide a squeak-free, vibration-free installation. Includes two (2) liners, enough for both sides of the Jeep.
Online
$62.50 for EA
Retail $73.90
Mfr PN: 12-08-310
Stock: 3

STEP-SLIDER ROCKER GUARDS STEP-SLIDER ROCKER GUARDS
Online
$220.37 for EA
Retail $248.84
Mfr PN: AX-SS-RG-JK4
Stock: 2
With a history of off-roading in its pedigree RSE has been tested in Utah’s back country from the beginning of it’s inception. Growing from a single bumper, RSE now is the leader in off-road products functionality and quality. Today’s RSE is driven by perfection. We pay meticulous attention to every last detail in our product line. Each RSE innovation is aimed at making your off-road experience better to any other.
Online
$220.37 for EA
Retail $248.84
Mfr PN: AX-SS-RG-JK4
Stock: 2

Trail Armor Rocker Panel and Sill Plate Protector Trail Armor Rocker Panel and Sill Plate Protector
Online
$126.93 for EA
Retail $269.28
Mfr PN: 14012
Stock: 2
Your Jeep Wrangler is made for getting off the beaten path. So make it stand out from the crowd, with custom-built Trail Armor(R) from Bushwacker. Trail Armor(R) combines trail-proven toughness with state-of-the-art Dura-Flex(R) 2000 TPO material for a look all its own. Dura-Flex(R) 2000 TPO is our proprietary automotive protective material, ruggedized for extra durability and flexibility. Unlike steel, it can't rust. And, unlike lesser products, it's 100% UV protected to prevent chalking. We make everything right here in the USA, designing to the tightest tolerances for a factory-like fit. Yet, you install Trail Armor(R) in minutes with automotive-grade 3M (TM) adhesive, no drilling needed. Like all Bushwacker products, Trail Armor(R) is backed by our Limited Lifetime Warranty. Your Trail Armor(R) starts out looking tough, and lives up to its looks year after year. Fits 2007 to 2014 JK Wrangler Unlimited 4-door models Paintable matte black finish 140% UV resistant No drilling required
Online
$126.93 for EA
Retail $269.28
Mfr PN: 14012
Stock: 2

Trail Armor Rocker Panel and Sill Plate Protector Trail Armor Rocker Panel and Sill Plate Protector
Online
$177.97 for EA
Retail $1299.99
Mfr PN: 14011
Stock: 1
Your Jeep Wrangler is made for getting off the beaten path. So make it stand out from the crowd, with custom-built Trail Armor(R) from Bushwacker. Trail Armor(R) combines trail-proven toughness with state-of-the-art Dura-Flex(R) 2000 TPO material for a look all its own. Dura-Flex(R) 2000 TPO is our proprietary automotive protective material, ruggedized for extra durability and flexibility. Unlike steel, it can't rust. And, unlike lesser products, it's 100% UV protected to prevent chalking. We make everything right here in the USA, designing to the tightest tolerances for a factory-like fit. Yet, you install Trail Armor(R) in minutes with automotive-grade 3M (TM) adhesive, no drilling needed. Like all Bushwacker products, Trail Armor(R) is backed by our Limited Lifetime Warranty. Your Trail Armor(R) starts out looking tough, and lives up to its looks year after year. Fits 2007 to 2014 JK Wrangler and Rubicon 2-door models Paintable matte black finish 140% UV resistant No drilling required
Online
$177.97 for EA
Retail $1299.99
Mfr PN: 14011
Stock: 1