• AR2000M ARMOR 2000 Watts Monoblock MOSFET Power Amplifier ARMOR 2000 Watts, Monoblock MOSFET Power Amplifier, Remote Subwoofer Level Control Amplifier Basics Amplifier Class: Class A/B Technology: MOSFET Number of Output Channels: 1 Max Power Ratings Total Power: 2000 Watts Max Power @ 2 Ohms: 2000 Watts x 1 RMS Power Ratings RMS Power @ 4 Ohms: 1000 Watts x 1 Details Frequency Response: 9 to 130 Hz Total Harmonic Distortion (THD) @ RMS Output: 0.
• 01% Signal-to-Noise Ratio (SNR): 105 dB Minimum Speaker Impedance: 2 Ohms Variable Low Pass Crossover: 40 to 130 Hz Dimensions: 2.
• 5625"" x 13.
• 125"" x 6.
• 5"" Features Soft Turn-On Circuit Thermal Overload & Speaker's Short Protection Remote Subwoofer Level Control Power & Protection LEDs .

4 CHANNEL AMPLIFIER
CLASS A/B
REMOTE BASS CONTROL
HI / LOW LEVEL INPUTS
FAN COOLED
18 dB VARIABLE BASS BOOST @ 45 Hz
VARIABLE HI / LOW CROSSOVERS (55 - 5500 Hz)
FREQUENCY RESPONSE: 20 - 30,000 Hz

4 x 120W RMS @ 4 OHMS
4 X 170W RMS @ 2 OHMS
2500 WATTS
3 X 30 AMP FUSES

8 7/8"e; WIDE x 2 1/2"e; HIGH x 17 7/8"e; LONG

2000 x 1 MAX @ 2 Ohms
500 x 1 RMS @ 4 Ohms

2 x 30 amp fuses

Trimode Capable
Line Output
Low Pass Crossover
MOSFET Power
Low Level Inputs
Variable Bass Boost
Bridgeable
Remote Bass Boost
Dimensions (WxHxL) 11?"e; x 2¾"e; x 15½"e;

60 x 4 + 200 RMS @ 4 Ohms
80 x 4 + 350W RMS @ 2 Ohms
640 Watts RMS total

Fuse 1 x 40A

Remote Bass Knob
2-Ohm Stable Class D Monoblock
Small Compact 5-1/4"e; Wide x 1-3/4 High Chassis
35-250Hz Variable 12dB LP Crossover
0-12dB 45Hz Bass Boost
High Level Inputs
Dimensions (WxHxL): 5-1/4"e; x 1-3/4 x 10-1/2"e;

1 X 1600 WATTS RMS @ 4 OHMS
1 X 3000 WATTS MAX @ 2 OHMS
4000 WATTS MAX POWER
MONO BLOCK CLASS D AMPLIFIER
1 OHM STABLE

3 X 35 AMP FUSES

REMOTE SUBWOOFER LEVEL CONTROL
LOW PASS VARIABLE CROSSOVER 50-150HZ
VARIABLESUSONIC FILTER 15-40Hz
VARIABLE BASS BOOST 0-18dB
PHASE SHIFT SELECTOR
INPUT LEVEL ADJUSTMENT
INPUT SENSITIVITY SELECTOR
LINE LEVEL INPUTS
POWER AND PROTECTION LEDS

DIMENSIONS: 10"e;W X 2 3/8"e;H X 15"e;L

• AR1600.
• 4 ARMOR 1600 Watts 4-Channel MOSFET Power Amplifier Specification: Amplifier Basics Amplifier Class: Class A/B Technology: MOSFET Number of Output Channels: 4 Max Power Ratings Total Power: 1600 Watts Max Bridged Power @ 4 Ohms800 Watts x 2 Max Power @ 2 Ohms400 Watts x 4 RMS Power Ratings RMS Power @ 4 Ohms160 Watts x 4 Details Frequency Response9 to 50000 Hz Total Harmonic Distortion (THD) @ RMS Output: 0.
• 01% Minimum Speaker Impedance in Bridged Mode: 4 Ohms Signal-to-Noise Ratio (SNR): 105 dB Minimum Speaker Impedance: 2 Ohms Variable Low Pass Crossover35 to 160 Hz Dimensions2.
• 5625"" x 12.
• 3125"" x 6.
• 5"" Features Bridgeable Soft Turn-On Circuit Thermal Overload & Speaker's Short Protection Remote Subwoofer Level Control Tri-Mode Operation Power & Protection LEDs .

1 X 1000 WATTS RMS @ 4 OHMS
1 X 2500 WATTS MAX @ 2 OHMS
2500 WATTS MAX POWER
MONO BLOCK MOSFET POWER

2 X 30 AMP FUSES

REMOTE SUBWOOFER LEVEL CONTROL
LOW PASS VARIABLE CROSSOVER 45-90HZ
VARIABLE BASS BOOST 0-18dB
INPUT SENSITIVITY SELECTOR
LINE AND SPEAKER LEVEL INPUTS
POWER AND PROTECTION LEDS

DIMENSIONS: 10"e;W X 2 3/8"e;H X 15 1/2"e;L

2 x 35 watts RMS @ 4 Ohms
2 x 500 Watts max @ 4 Ohms

1 x 20 amp fuse

2 Ohm stable
MOSFET Pulse Width Modulated Power Supply
Tri-Mode Capable
Variable Gain Control
Variable Subwoofer Crossover
MOLEX Input Connector
RCA Low Level Inputs
3-Way Protection
LED Diagnostic Indicator
Bridgeable

Dimensions (WxHxL)
9 5/8"e; x 2¼"e; x 9 5/16"e;

Number of Channels Mono
Maximum Power Output 2400 W
Continuous Power Output (1 O, = 1% THD+N) 1200 W x 1
Continuous Power Output (2 O, = 1% THD+N) 800 W x 1
Continuous Power Output (4 O, = 1% THD+N) 500 W x 1
Continuous Power Output Bridged (4 O) ?
Fuses: 3 x 40 amp
Frequency Response 10 Hz to 240 Hz
Total Harmonic Distortion (4 O) < 0.5% (100 Hz)
Signal-to-Noise Ratio (IHF-A Weighted, at 1 kHz) > 100 dB
Wired Bass Boost Remote and Variable Bass Control
Dimensions: 7 7/8"e;W x 2 1/8"e;H x 12 1/2"e;L

4000W MAX @ 1 OHM

OPTIONAL REMOTE BASS KNOB:PHREMOTE1 (3.5mm PLUG)
MONO BLOCK AMPLIFIER
1 OHM STABLE
VARIABLE LOW PASS FILTER
VARIABLE SUBSONIC FILTER
VARIABLE BASS BOOST
FREQ. RESPONSE: 10Hz-220Hz
4-WAY PROTECTION (THERMAL, VOLTAGE, SPEAKER SHORT AND DC)
150 AMP EXTERNAL FUSE REQUIRED (NOT INCLUDED)

5 1/2"e;W X 2 1/8"e;H X 13 1/2"e;L

300 x 2 MAX @ 2 Ohms
125 x 2 RMS @ 4 Ohms
600 watts max

1 x 30 amp fuse

Trimode Capable
MOSFET Power
Hi/Low Level Inputs
Variable Bass Boost
Hi/Low Pass Crossover
Bridgeable
Remote Bass Boost
Dimensions (WxHxL) 10½"e; x 2¼"e; x 9¼"e;

Number of Channels Mono
Maximum Power Output 1600 W
Continuous Power Output (1 O, = 1% THD+N) 800 W x 1
Continuous Power Output (2 O, = 1% THD+N) 500 W x 1
Continuous Power Output (4 O, = 1% THD+N) 300 W x 1
Continuous Power Output Bridged (4 O) ?
Fuses: 2 x 40 amp
Frequency Response 10 Hz to 240 Hz
Total Harmonic Distortion (4 O) < 0.5% (100 Hz)
Signal-to-Noise Ratio (IHF-A Weighted, at 1 kHz) > 100 dB
Wired Bass Boost Remote and Variable Bass Control
Dimensions: 7 7/8"e;W x 2 1/8"e;H x 10 1/2"e;L

• BOSS AUDIO 1800 WATT AMPLIFIER  CRBS1800 1800 W MAX Power, 4 Channel 338 W X 4 RMS @ 2 ohm 169 W X 4 RMS @ 4 ohm 675 W X 2 RMS Bridged @ 4 ohm Full Range, Class A/B, MOSFET Power Supply Variable High Pass Crossover, Variable Low Pass Crossover, Variable Bass Boost Inputs: High and Low Level .

100W RMS X 2 @ 4 OHMS
150W RMS X 2 @ 2 OHMS
1000W MAX X 2 @ 2 OHMS
2000W MAX X 1 @ 4 OHMS
2000 WATTS MAX POWER RATING

2 X 40 AMP MAXI FUSE

2 OHM STABLE
CROSSOVER MODE SELECTOR & FREQUENCY CONTROL
LOW PASS CROSSOVER 40Hz-250Hz
HIGH PASS CROSSOVER 40Hz-250Hz
INPUT LEVEL CONTROLS
BASS BOOST SELECTOR
VARIABLE SUBSONIC FILTER: 10Hz-100Hz, 24dB/OCTAVE
THERMAL/OVERLOAD/SHORT CIRCUIT PROTECTION
SOFT TURN ON/OFF
MOSFET POWER SUPPLY
POWER AND PROTECTION LED INDICATORS
LOW LEVEL RCA INPUTS
LINE LEVEL RCA OUTPUT
FREQUENCY RESPONSE: 15Hz-30KHz
SIGNAL TO NOISE RATIO: >95dB


DIMENSIONS: 10 5/8"e;W X 1 5/8"e; X 13 1/4"e;L

120W X 4 MAX @ 2 OHMS
80W X 4 RMS @ 4 OHMS

1 X 60 AMP FUSE EXTERNAL FUSE REQUIRED

5 1/2"e;W X 2 1/4"e;H X 10 3/8"e;L

1 X 1200 WATTS RMS @ 4 OHMS
1 X 2200 WATTS MAX @ 2 OHMS
3000 WATTS MAX POWER
MONO BLOCK CLASS D AMPLIFIER
1 OHM STABLE

2 X 35 AMP FUSES

REMOTE SUBWOOFER LEVEL CONTROL
LOW PASS VARIABLE CROSSOVER 50-150HZ
VARIABLESUSONIC FILTER 15-40Hz
VARIABLE BASS BOOST 0-18dB
PHASE SHIFT SELECTOR
INPUT LEVEL ADJUSTMENT
INPUT SENSITIVITY SELECTOR
LINE LEVEL INPUTS
POWER AND PROTECTION LEDS

DIMENSIONS: 10"e;W X 2 3/8"e;H X 13"e;L

Class A/B 2 Channel Power Amplifier
500W X 2 @ 4 OHMS MAX
1000W X 2 @ 2 OHMS MAX
2000W X 1 @ 4 OHMS BRIDGED
FUSES:

Full Range, CLASS A/B
MOSFET Power Supply
Low and High Level Inputs
Variable Input Gain Control
Variable Low Pass Crossover
Variable Low Pass Crossover
Variable High Pass Crossover
Fixed HP Crossover
Variable Bass Boost
2 Ohm Stereo Stable
DIMENSIONS: 9-11/16"e;W x 2-3/8"e;H X 12-3/16"e;

5-channel car amplifier
40 watts RMS x 4 at 4 ohms + 300 watts x 1 at 4 ohms
50 watts RMS x 4 at 2 ohms + 500 watts RMS x 1 at 2 ohms
100 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
fuse rating: 40A x 2

CEA-2006 compliant
variable low-pass filter on subwoofer channel (50-200 Hz at 24 dB per octave)
separate variable high-pass filters on front and rear channels (50-200 Hz at 12 dB/octave)
variable bass boost on sub channel (0-18 dB at 40 Hz)
cooling fan
preamp inputs
4-gauge power and ground leads recommended
13-3/4"e;W x 2-1/4"e;H x 7-5/8"e;D